The Astrozap dual-channel controller uses pulse-width modulation technology. Each channel controls two outputs of a total of four outputs. Each channel is able to maintain a duty cycle of 5% at low setting to 95% at high setting. The Astrozap dew regulator is designed to operate at 12 volts DC and should never be operated at any other voltage. The total current capacity for all four outputs is 5 amps - We recommend using Astrozap Heater bands however other brands can be used once they are a similar rating.

The controller is supplied with a cable about 1.8 meters long, which is equipped with a cigarette lighter plug. A 5-amp fuse is integrated in the connector. The red power LED indicates that the controller is being powered and the two red lights on the outputs indicate the power level of each channel. The brighter the red LEDs, the longer the duty cycle for this channel. When it is set to the lowest setting, it is effectively turned off. It also includes a 2-inch Velcro strap for attaching the controller to a suitable area of your telescope mount.

Specs:

• Voltage input: 12V DC
• Voltage output: 12V DC
• Maximum current: 5 A (fuse in the plug)
• Power range: 5% to 95%
• Number of channels: 2
• Power port: Cigarette lighter plug
• Length of power cord: approx. 1.8 m
• Heater output ports: RCA sockets
• Number of output ports: 4 (2 per channel)

IMPORTANT: Its essential that when placing an order, you include a valid 'Contact Telephone Number' for the delivery address or for the person receiving the item. This is necessary to avoid potential delays or problems with your delivery.

Shipping Disclaimer: All of our parcels are sent via a 3rd party registered courier service to ensure safe and prompt delivery. While we endeavor to ensure that all parcels are delivered within the specified time frame, 'Horizon Astronomy' can not be held responsible for delays due to adverse weather conditions or other courier/technical related issues outside of our control.