{"title":"Pegasus Astro","description":"\u003cp\u003eHorizon Astronomy is an Authorised PEGASUS ASTRO Retailer for Europe. If you are looking for a specific Pegasus Astro product not listed below please \u003ca href=\"https:\/\/www.horizonastronomy.ie\/pages\/contact-us\" target=\"_blank\" rel=\"noopener\"\u003econtact us here\u003c\/a\u003e\u003ca href=\"https:\/\/www.horizonastronomy.ie\/en-de\/pages\/contact-us\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e - and we would be happy to help you.\u003c\/p\u003e","products":[{"product_id":"pegasus-astro-usb-control-hub","title":"Pegasus Astro USB Control Hub","description":"\u003cp\u003e\u003cstrong\u003eThe Pegasus Astro USB Control Hub (in short UCH).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA SuperSpeed (SS), low power, switchable USB3.1 Gen1 hub and fully compliant with USB-IF´s USB 3.1 Gen1 specification. The hub supports Hi-Speed (HS), Full Speed (FS) and Low Speed (LS). The new SuperSpeed hubs operates in parallel with the USB 2.0 controllers, so that 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6 x USB3.1 Active Ports:\u003c\/strong\u003e\u003cbr\u003eThis device has 6 x USB 3.1 Ports. All ports are backwards compatible with USB 1.0 and USB 2.0 devices. In addition to this, each port can deliver up to 2.5 A of current. There is a smart current limit sensor in every port which automatically limits or cuts power in case of a short-wire or power consumption that is above 2.5 A. Each port is monitored by the USB controller and in case of a current limit, it triggers a warning popup in the operating system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum Enclosure:\u003c\/strong\u003e\u003cbr\u003eA high quality robust, blue anodised aluminum enclosure houses the electronics of the USB hub. The metal enclosure designed and tested to survive ±5 kV ESD strikes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchable USB Ports:\u003c\/strong\u003e\u003cbr\u003eEach USB port can be controlled and switched ON\/OFF by Pegasus Astro´s standalone software (power + data). You are going to love this feature. No more pull out and re-plug USB cables of your equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12 V DC Operation:\u003c\/strong\u003e\u003cbr\u003eThe 12 V DC operation was Pegasus Astro´s first design requirement. As most of your astro-equipment work with 12 V DC why to use something different?\u003c\/p\u003e\n\u003cp\u003eThe Hub accepts 12-14 V for operation. This means that you can plug unregulated 12V power from a battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndustrial grade temperature support:\u003c\/strong\u003e\u003cbr\u003eMost USB hubs in the market (well, nearly all of them) operate under room temperatures as they were design to work inside your cosy warm room. This is one of the reasons why you experience USB disconnects and instability during a cold night.\u003c\/p\u003e\n\u003cp\u003eThis product is certified to work flawlessly from -40 °C to +85 °C. All USB hub electronics has been selected to support industrial grade temperature ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eASCOM Switch support:\u003c\/strong\u003e\u003cbr\u003eDevice fully supports ASCOM switch. This means that you can switch ON\/OFF each USB port via ASCOM supported software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpansion Port (EXT):\u003c\/strong\u003e\u003cbr\u003eAn RJ12 external ports allows future device expansion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandalone Software:\u003c\/strong\u003e\u003cbr\u003eSwitch ON\/OFF USB Ports on demand. Monitor USB voltage levels. Easily name each USB port based on the device that is attached on it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003cbr\u003eDevice is fully compatible with Microsoft Windows 10, 8, 7, XP, Apple OS X 10.4+, and Linux hub drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Ports: Six downstream USB 3.1 Gen1 \/ 2.0 ports\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB Switchable Ports: All of them [1-6], power \u0026amp; data\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Input: 12-14 VDC, 5.5\/2.1mm coaxial power connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmperage on individual port: 2.5 A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Total Amperage:    8A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: Industrial grade temperature support (-40 °C to +85 °C)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: 100 mm x 72 mm x 24 mm \/ 3.9\" x 2.8\" x 0.94\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 200 g \/ 7 oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUSB Control Hub Unit\u003c\/li\u003e\n\u003cli\u003eUSB 3 cable, 1.5 meter long, male A to male B\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":49210302628175,"sku":"PEG-UCH","price":239.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PEG-UCH-PegasusAstroUSBHub.jpg?v=1719584163"},{"product_id":"pegasus-astro-advanced-usb-control-hub","title":"Pegasus Astro Advanced Pocket Powerbox Control Hub - Gen 2","description":"\u003cp\u003e\u003cstrong\u003ePegasusAstro Pocket Powerbox Advance (PPBADV) - Universal Power Supply\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Pocket Powerbox Advance (PPBADV) is a welcome addition to Pegasus Astro´s \"Powerbox\" product series. It has been designed to provide more advanced features in a more compact \/ quality design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 x 12 V DC power outlets for your equipment:\u003c\/strong\u003e\u003cbr\u003eA powerful MOSFET transistor provides \"electric juice\" to your precious equipment. It supplies 4 electrical outputs which can be switched on\/off via software (not individually).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable regulated output:\u003c\/strong\u003e\u003cbr\u003eAn adjustable output is suitable to provide power to your DSLR or mirrorless system camera. You can tune the voltage to different levels (3, 5, 8, 9, 12 V). Pegasus Astro provides different battery couplers for Canon, Nikon, Sony, FUJI cameras.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt in voltmeter:\u003c\/strong\u003e\u003cbr\u003eA precise voltmeter measures and displays in real time your input voltage. If the input is more than 14 V, the power is instantly cut off to protect your equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt in Amp-meter:\u003c\/strong\u003e\u003cbr\u003eAn Amp-meter placed on the input reports the total current consumed.\u003c\/p\u003e\n\u003cp\u003eIn addition to this, there are three additional amp-meters. One for the 12 V outputs and two for the dew heater channels. Now you can monitor the detailed power consumption of your equipment\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore than 12 A of total power:\u003c\/strong\u003e\u003cbr\u003eController has been designed to support up to 12 Amps of total current.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandalone operation:\u003c\/strong\u003e\u003cbr\u003ePocket Powerbox Advance can work \"out of the box\" as a standalone device. Just plug the cables, setup the \"autodew\" functionality and every time you boot the device, it will retrieve your settings. So, if you don´t want to connect a PC every time, you don´t have to. Simple as that!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo channel duty cycle PWM outputs:\u003c\/strong\u003e\u003cbr\u003eTwo pulse width modulation (PWM) outlets are capable to provide power to your \"thirsty\" dew heaters. No more moisture fuzzing your equipment and destroying your clear nights. These outlets can be remote controlled from your laptop using the supplied software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuto adjustment of PWM (dew outputs):\u003c\/strong\u003e\u003cbr\u003eController can auto adjust the heater power levels by consulting the environmental sensor dew point reading. Just click \"Auto\" and leave it for the Pocket Powerbox to decide if its time to turn on and precisley tune the level of your dew heaters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmbedded USB3 hub - 2 x USB3 \u0026amp; 2 x USB2 Ports:\u003c\/strong\u003e\u003cbr\u003eA powered USB3 hub at the back of the device provides\u003cbr\u003e 2 x USB3 SuperSpeed Ports\u003cbr\u003e 2 x USB2 High-Speed Ports\u003c\/p\u003e\n\u003cp\u003eThe new Super Speed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps Super Speed data transfers are not affected by slower USB 2.0 traffic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 x USB high power output:\u003c\/strong\u003e\u003cbr\u003eA special USB port (Port 1) provides 5.2 V \/ 3 Amps. You can connect any device that requires 5 V. For example a Raspberry PI 3\/4 or an Intel Compute Stick M3\/M5 can be powered from this port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpansion port (EXT):\u003c\/strong\u003e\u003cbr\u003eEXT (expansion) port is available for device expansion. This RJ12 socket allows the connectivity of current and future Pegasus Astro products. Plugged devices can be controlled from the Pocket Powerbox Advance standalone software or a dedicated ASCOM driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact aluminium enclosure:\u003c\/strong\u003e\u003cbr\u003eA high quality robust, blue anodised aluminium enclosure houses the electronics of the Pocket Powerbox Advance. Size is 100 mm x 71 mm x 24 mm. Weighs 250 grams.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eASCOM 6 fully supported:\u003c\/strong\u003e\u003cbr\u003ePocket powerbox fully supports ASCOM6. In combination with the main program which acts as a server you can use PegasusAstro´s latest ASCOM 6.4 supplied drivers to:\u003cbr\u003ePass environmental settings to supported software (for example Sequence Generator Pro \/ MaximDL) (ASCOM ObservingConditions)\u003cbr\u003eSwitch ON or OFF all 12 V outputs. (ASCOM Switches)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDI fully supported:\u003c\/strong\u003e\u003cbr\u003ePocket powerbox fully supports INDI, so you can bundle it with Stellarmate or any other device that can use INDILib.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLed indications for power and failure states:\u003c\/strong\u003e\u003cbr\u003eLed's can blink in patterns to warn you regarding important power issues (like over or under voltage). In addition to this the lights can be turned off using the software. The led is very dim but just in case you don't want them switched on, you can switch it off via the software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower cables are included in the package:\u003c\/strong\u003e\u003cbr\u003eFour power cables with DC connectors 2.1 mm to 2.1 mm male (1 m) are included in the package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExternal environmental sensor:\u003c\/strong\u003e\u003cbr\u003eExternal one (1) meter temperature \u0026amp; relative humidity sensor is included in the package. Know exactly the environment conditions of your location. Temperature, humidity and dew point measurements are displayed in the software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e\u003cbr\u003eConnect the device to your laptop\/PC and control Pocket Powerbox Advance from the supplied software or ASCOM drivers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReverse polarity protection:\u003c\/strong\u003e\u003cbr\u003ePocket Powerbox has been designed with a reverse voltage polarity protection. It will definitely save your night if you accidentally connect the main power supply in reverse polarity!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWatchdog:\u003c\/strong\u003e\u003cbr\u003eA hardware watchdog resets the device if for any reason there is no response from the controller for two seconds. A neat feature in the unlikely event of a controller freeze - when you have a remote observatory and you need to be certain that everything works as expected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpgradable firmware:\u003c\/strong\u003e\u003cbr\u003eDevice is firmware upgradable to support future features and bug fixes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting accessories:\u003c\/strong\u003e\u003cbr\u003eMounting bolts are available \u003ca href=\"https:\/\/www.horizonastronomy.ie\/products\/m3-x-10mm-attachment-bolts-3-pack?_pos=1\u0026amp;_sid=419a6aaa9\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: 12 V - 13.8 V DC (reverse polarity protected)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Input Connector: DC 5.5\/2.1mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB3 - Type B USB Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 x 12 V Outputs: Maximum current 10 amps in total, 5.5\/2.1mm tip positive,\u003c\/li\u003e\n\u003cli\u003esoftware-controlled ON\/OFF for all ports\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 Channel x 12 V PWM Outputs: Maximum current 5 A each, black colored RCA\u003c\/li\u003e\n\u003cli\u003econnector, pulse width modulated (suitable for dew heaters or a Flatbox), software\u003c\/li\u003e\n\u003cli\u003econtrol for duty cycle % \/ OFF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Sensor Input: Mini stereo socket, connectivity with environmental sensor, 0-\u003c\/li\u003e\n\u003cli\u003e100% humidity readings with 2-5% accuracy, -40 to 80 °C temperature readings with ±0.5 °C accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCamera \/ DSLR Output: Max 3 Amps, 3\/5\/8\/9\/12 Volt, connector 5.5\/2.1 mm, tip positive\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEmbedded Powered USB3 Hub: 2 x USB2 Ports \u0026amp; 2 x USB3 Ports Available (USB3 ports are backwards compatible with USB2 devices)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower USB Port 1: 5.2 V, 3 A, thus suitable for Raspberry PI 3\/4\u003cbr\u003eRJ12 port: For external accessories (like external focus controller)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltmeter: Measures 5 - 15 V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 100 mm x 71 mm x 24 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 250 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNote:\u003c\/span\u003e If your devices are not recognised by the controller, please ensure you always connect all the devices by USB cable first, before you connect the controller power supply. This was when the controller powers on, it will scan and pick up the connected devices.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePocket Powerbox Advance controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal temperature \/ humidity sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 x power DC 2.1 to 2.1 male cable (2x 1 m, 2x 0,5 m)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB3 cable type B (1.8 m)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":49210346176847,"sku":"PEG-PPBADV","price":315.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PEG-PPBADVPegasusAstro-PowerboxUSBHub.jpg?v=1719585806"},{"product_id":"pegasus-astro-flat-panel-flatmaster-150","title":"Pegasus Astro FlatsMaster 150L - Wifi","description":"\u003cp\u003e\u003cstrong\u003eThis LED flatfield panel provides a uniform source of illumination for apertures up to 150mm and produces high-quality flat field frames for astrophotography and photometric captures.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDimmable Panel:\u003c\/em\u003e\u003cbr\u003eUnlike other panels on the market, the FlatMaster can adjust its brightness from 0 to 100%. Forget sheets of paper between your telescope and the panel, you can now remotely control the brightness of your panel using the Wifi link. Store the brightness as per each filter and immediately retrieve the value you need again at a later date.\u003c\/p\u003e\n\u003cp\u003eThe Flatmaster 150L can go up to very high brightness levels so it can easily support short exposures (2-3 seconds at f\/7) with 3nm narrowband imaging filters. Only one USB type B cable is required to provide power and control of your panel.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eManual Operation:\u003c\/em\u003e\u003cbr\u003eThe FlatMaster has a small push button that sets different gradual levels of brightness, in case you would like to manually operate the FlatMaster instead o using the Wifi. Just click the push button to control the brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWifi \u0026amp; USB control:\u003c\/em\u003e\u003cbr\u003eThe Flatmaster is Wi-Fi enabled, allowing you to control and monitor panel brightness remotely from your mobile phone. In addition to this you can operate it simultaneously with USB or Wi-Fi at he same time, providing flexibility and ease of use for astronomers, all from the convenience of your smartphone.\u003c\/p\u003e\n\u003cp\u003eOnce connected to the FlatMaster Wi-Fi hotspot, you can access the control the panel by simply entering “flatmaster.local” into any web browser. This feature is an independently operated system and works seamlessly alongside USB control,such as through Nina or equivalent offering huge flexibility and convenience across a wide range of setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Led Light Panel (White)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimmable: Yes – (0-100%)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Strong black ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual Push Button: Different brightness levels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsable diameter of circle: 150mm \/ 5.9 inches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower requirements: 5V DC provided by USB mini cable (500mA max current)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: Diameter 250mm x 8mm thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 350g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi Capabilities: Access Point or Client (at 2.4GHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats\u003c\/em\u003e\u003cem\u003e included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eFlatMaster 150 (suitable for any telescope with aperture up to 150mm or 5.9 inches)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCable USB2 Type B 1.8m\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eCarrybag\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cem\u003eOperating software can be downloaded directly from \u003ca href=\"https:\/\/pegasusastro.com\/products\/flatmaster-150-wifi\/\" target=\"_blank\" title=\"Flatspanel Software Pegasus Astro\" rel=\"noopener\"\u003ePegasus Astro here\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":49210411188559,"sku":"PEG-FLTMSTR150L-WIFI","price":220.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/FLTMSTR150_-_Pegasus_Astro_Flats_Panel.jpg?v=1792925395"},{"product_id":"pegasus-astro-flat-panel-flatmaster-250","title":"Pegasus Astro FlatsMaster 250L - Wifi","description":"\u003cp\u003e\u003cstrong\u003eThis LED flatfield panel provides a uniform source of illumination for apertures up to 10\" telescopes and produces high-quality flat field frames for astrophotography and photometric captures.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDimmable Panel:\u003c\/em\u003e\u003cbr\u003eUnlike other panels on the market, the FlatMaster can adjust its brightness from 0 to 100%. Forget sheets of paper between your telescope and the panel, you can now remotely control the brightness of your panel using the Wifi link. Store the brightness as per each filter and immediately retrieve the value you need again at a later date.\u003c\/p\u003e\n\u003cp\u003eThe Flatmaster 250L can go up to very high brightness levels so it can easily support short exposures (2-3 seconds at f\/7) with 3nm narrowband imaging filters. Only one USB type B cable is required to provide power and control of your panel.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eManual Operation:\u003c\/em\u003e\u003cbr\u003eThe FlatMaster has a small push button that sets different gradual levels of brightness, in case you would like to manually operate the FlatMaster instead o using the Wifi. Just click the push button to control the brightness.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWifi \u0026amp; USB control:\u003c\/em\u003e\u003cbr\u003eThe Flatmaster is Wi-Fi enabled, allowing you to control and monitor panel brightness remotely from your mobile phone. In addition to this you can operate it simultaneously with USB or Wi-Fi at he same time, providing flexibility and ease of use for astronomers, all from the convenience of your smartphone.\u003c\/p\u003e\n\u003cp\u003eOnce connected to the FlatMaster Wi-Fi hotspot, you can access the control the panel by simply entering “flatmaster.local” into any web browser. This feature is an independently operated system and works seamlessly alongside USB control,such as through Nina or equivalent offering huge flexibility and convenience across a wide range of setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Led Light Panel (White)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimmable: Yes – (0-100%)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Strong black ABS plastic\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual Push Button: Different brightness levels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsable diameter of circle: 250mm \/ 10 inches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower requirements: 5V DC provided by USB mini cable (500mA max current)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: Diameter 250mm x 8mm thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 840g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi Capabilities: Access Point or Client (at 2.4GHz)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eFlatMaster 250 (suitable for any telescope with aperture up to 150mm or 5.9 inches)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCable USB2 Type B 1.8m\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cem\u003eOperating software can be downloaded directly from \u003ca href=\"https:\/\/pegasusastro.com\/products\/flatmaster-250-wifi\/\" target=\"_blank\" title=\"Flatspanel Software Pegasus Astro\" rel=\"noopener\"\u003ePegasus Astro here\u003c\/a\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003c!----\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":49210419577167,"sku":"PEG-FLTMSTR250L-WIFI","price":495.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/FLTMSTR250-PegasusAstroFlatsPanel_1.jpg?v=1792925740"},{"product_id":"pegasus-camera-field-rotator","title":"Pegasus Astro - Falcon Rotator V2","description":"\u003cp\u003e\u003cstrong\u003eThe Pegasus Astro Falcon Rotator V2 is a light-weighted, low profile camera field rotator. Its very easy to operate via ASCOM drivers or by using standalone software which will make your life much easier by allowing you to automatically adjust your exact camera field of view with precision.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOperating the Falcon Rotator V2 is a seamless experience, thanks to its compatibility with classic ASCOM, native ASCOM Alpaca drivers and the Unity Platform software. This user-friendly design simplifies the process of automatically and precisely orienting your camera field, making your astrophotography endeavors significantly more convenient and efficient.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eM68 threads on both sides and low profile:\u003c\/em\u003e\u003cbr\u003eBoth sides of the rotator are M68 threaded, so it is possible to use large sensors without vignetting. The thickness of the rotator is just 15.5mm and the weight only 700g, but it can handle a 6kg payload.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdapters for both sides:\u003c\/em\u003e\u003cbr\u003eThere are adapters for many common threads available which can be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrecise rotation:\u003c\/em\u003e\u003cbr\u003eA powerful geared \/ low backlash stepper motor ensures that the rotator will lock to the designated degree angle. High quality mechanical components inside the focuser prevent flexure at any point during a full circle rotation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHigh rated load:\u003c\/em\u003e\u003cbr\u003eFalcon Rotator V2 has been tested at 6Kg (13lbs) of imaging setup. The mechanical design allows it to custom tighten internal bearing so it can easily handle higher payloads with almost zero flexure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOne Cable Operation:\u003c\/em\u003e\u003cbr\u003eThe rotator can be connected with a USB-C cable for both power and data, reducing complexity in your telescope setup. Additionally, it´s Wi-Fi enabled, allowing you to control your field rotation remotely from your mobile phone.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eField De-Rotation support for Alt\/Az mounts:\u003c\/em\u003e\u003cbr\u003eThe rotator has the mechanical precision to achieve field de-rotation. The supplied Unity Platform calculates Rate of Rotation (RoR) based on the site latitude, target altitude and azimuth position. By fine-tuning the micro-step drive control of the motor, derotation can achieve a resolution as precise as 5 arc-seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eASCOM \u0026amp; INDI support:\u003c\/em\u003e\u003cbr\u003eThe rotator is fully ASCOM 6 supported. INDI support will follow by the time of the launch.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStandalone software:\u003c\/em\u003e\u003cbr\u003eControl the Falcon Rotator with the supplied standalone Windows software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree aperture: M68\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePayload: 6kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTelescope connection: Female thread M68x1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCamera connection: Female thread M68x1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBack focus: 15.5mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eData connection: USB 2.0, USB-C port\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating power: 5V, 0.7A (via USB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHousing material: Aluminum\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 180mm x 140mm x 56mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 0.7kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"font-style: italic;\"\u003e\n\u003cem\u003eFalcon rotator V2\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-style: italic;\"\u003e\n\u003cem\u003e2 x Adapters - M68x1M to M54x0.75F\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-style: italic;\"\u003e\u003cem\u003eUSB-C cable (1.5m)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":54591205376335,"sku":"PEG-ROT-FALCON2","price":729.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus_Astro_Rotator_V2_7.jpg?v=1755947169"},{"product_id":"pegasus-focuscube-v3-motor-focus","title":"Pegasus FocusCube V3 Motor Focus - Universal","description":"\u003cp\u003e\u003cstrong\u003ePegasus Astro FocusCube v3 - Is a standalone Motorised Focuser. \u003c\/strong\u003e\u003cstrong\u003eIntroducing this cutting-edge solution to achieve fast, reliable, and precise focusing of your telescope in the ever-evolving field of astrophotography. This is especially important in an era where fast optics and advanced camera devices are essential and maintaining accurate focus is paramount.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocuser Overview:\u003c\/strong\u003e\u003cbr\u003eThe below features collectively make FocusCube 3 a versatile and user-friendly device for achieving accurate and repeatable focus in astronomy, catering to both automated and manual control preferences.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and Precise Focusing: Swift and accurate focusing for modern telescopes and cameras.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomated Focusing with Temperature Compensation: Maintains optimal focus by automatically adjusting for temperature changes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Torque Motor: Can move up to 6kg even when pointing at zenith.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow Backlash: Minimized play for precise focus v-curve points.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUniversal Bracket: Fits various focusers (4mm to 8mm couplers included).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital Temperature Sensor: Monitors ambient temperature changes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB-C Connectivity: Single cable for power and data.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi Enabled: Hotspot and wireless 2.4 GHz client support.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeb Browser Access: Control via web browser on any device, making it OS-independent.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eASCOM Alpaca Support: Seamless integration with popular software.\u003cbr\u003eFirmware Upgradability: Future-proof with software updates.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional External Hand Controller: Ideal for visual observers who prefer manual control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable and Universal Bracket for Seamless Focuser Compatibility - This versatile Universal bracket features custom-made holes and rails, meticulously designed to ensure seamless integration with many telescope focusers. Whether you have a refractor, reflector, or any other telescope type, the FocusCube 3’s bracket can be adjusted to meet your exact needs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh resolution Geared Stepper Motor coupled with a robust gearbox, delivering an exceptional level of torque that can effortlessly lift and support telescope equipment weighing up to 6 kg, even when pointing at the zenith. What sets this motor system apart is its meticulous attention to precision, as the backlash has been minimized to achieve very low values.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSolid motor couplers included in the package - The package features a selection of five solid motor couplers, each featuring a different bore size. This thoughtful provision allows you to precisely match the coupler to your telescope focuser’s shaft, ensuring a secure and snug fit.\u003cbr\u003eWith options ranging from 4mm to 8mm couplers, you have the flexibility to seamlessly integrate the FocusCube 3 with a wide range of telescope setups.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB \u0026amp; Wi-Fi Connectivity - The FocusCube 3 offers streamlined convenience with a single USB-C cable for both power and data, reducing complexity in your telescope setup. Additionally, it’s Wi-Fi enabled, allowing you to control and monitor focus remotely from your mobile phone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuccessful installation on the following telescopes: \u003cbr\u003eThe installation of the Universal L bracket on a wide range of telescope focusers has proven to be exceptionally straightforward and swift, ensuring a hassle-free experience for users.\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBaader Diamond Steeltrack\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBaader Steeltrack\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExplore Scientific Focuser\u003c\/li\u003e\n\u003cli\u003eAskar Telescopes Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMoonLite Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSkywatcher Esprit Series Focuser\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarField Optics Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarlight Feathertouch Series\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStellarvue Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTakahashi FS-60, TSA-120, Epsilon Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTakahashi FSQ \u0026amp; TOA Focuser\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVixen ED81S\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWilliam Optics GT71\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWilliam Optics RedCat\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOther Features include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAccurate and Repeatable Focus V-Curves with FocusCube 3\u003cbr\u003eFocusCube v3 Harmonizes with Leading Imaging Suites - NINA, SGPro, Voyager, APT, MaximDL, and More!\u003c\/p\u003e\n\u003cp\u003eThe V-Curve results achieved with the FocusCube 3 are consistently accurate and reliably repeatable every time the autofocus routine is initiated.\u003c\/p\u003e\n\u003cp\u003eThe FocusCube 3 offers a hassle-free \"focus and forget\" operation, allowing you to set their focus parameters and continue you observations without constant manual adjustments.\u003c\/p\u003e\n\u003cp\u003eASCOM Alpaca Native Support\u003cbr\u003eFocusCube 3 offers Alpaca native support and a convenient web interface for easy smartphone control of your device.\u003c\/p\u003e\n\u003cp\u003eASCOM Alpaca outshines classic ASCOM drivers with its platform independence, modern web standards, streamlined installation, remote control capabilities, extensibility, and open-source options. This ensures superior compatibility and user-friendly performance, making it the preferred choice for advanced astronomy applications.\u003c\/p\u003e\n\u003cp\u003eFocusCube 3 comes equipped with an integrated web server that seamlessly communicates with Alpaca clients natively. This integration enhances the user experience by providing easy access to telescope focus control through ASCOM Alpaca but also monitoring from any device with a web browser such as a smart phone. Upon connecting to the FocusCube hotspot, the focuser control is automatically spawned for immediate use. Furthermore, you can conveniently access it from any web browser by simply typing \"focuscube.local\" in the address bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eTemperature Probe:\u003c\/em\u003e\u003cbr\u003eThe FocusCube 3 features an external digital temperature sensor input on the focuser’s side, and it comes with a digital temperature sensor. This sensor can be placed near the focuser, allowing you to monitor the exact temperature of both the focuser and the surrounding environment in real-time through the included software or ASCOM driver.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eExpansion Port \/ Manual Focus:\u003c\/em\u003e\u003cbr\u003eFocusCube 3 features an expansion RJ12 port situated at the rear of the enclosure, designed to accommodate the EZY-Focus Hand Controller for manual focus control. This optional accessory allows users to enhance their setup with precise manual focusing capabilities.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eASCOM and INDI support:\u003c\/em\u003e\u003cbr\u003eFocusCube v3 boasts full support for the latest ASCOM, ASCOM Alpaca, and INDI frameworks, ensuring compatibility with a wide range of astronomical software and platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: From USB (5V)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent Max: 900mA @ 5V\u003c\/li\u003e\n\u003cli\u003eMotor Output: None required, The stepper motor is built-in\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB Connectivity: USB-C socket (USB2 signalling)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermal Sensor Resolution: 9-bit Celsius temperature measurements\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Input Connector: USB-C Socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor: High resolution geared stepper motor (Step Angle (Deg) 7.5 \/ 120 Gearbox.Pull-in torque 60N.cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 59mm x 50mm x 44mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 260g (enclosure with electronics)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Tempetature: -30 °C to +80 °C\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eFocusCube Focuser\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eUniversal L Bracket\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eTemperature sensor (0.6m)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eUSB type A\/C cable (1.m)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFive different motor couplers (bore diameter from 4mm to 8mm)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eDifferent sizes (pairs of M3x10, M4x10, M4x40 M5x10, M6x10) of metric screws and spacers\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e4 x M3x6 screws (to attach the enclosure on the bracket)\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":54747081965903,"sku":"PEG-FC3-UNIV","price":289.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PegasusAstroUniversalMotorFocus_1.jpg?v=1743007166"},{"product_id":"pegasus-focuscube-v3-motor-focus-for-celestron-sct-telescopes","title":"Pegasus FocusCube V3 Motor Focus (For Celestron SCT Telescopes)","description":"\u003cp\u003e\u003cstrong\u003eA must have for successful automated astrophotography sessions, this Auto-Focuser is fast, reliable and designed with high quality materials and modern electronics. FocusCube can provide digital precise focus control from a PC. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device includes a stepper motor for very accurate position focusing with all the electronics and stepper motors enclosed in a compact-sized box.\u003c\/p\u003e\n\u003cp\u003eThe stepper motor provides high speed, focus accuracy, and zero backlash. Attach the FocusCube Zero to your Celestron SCT telescope with the correct adapter, plug in the power, the USB cable and download ASCOM drivers or the Pegasus Unity platform and you are ready to go!\u003c\/p\u003e\n\u003cp\u003eIMPORTANT NOTES:\u003cbr\u003eFocusCube is a standalone device and includes full focus control functionality. No physical hand controller is included or required.\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDO NOT\u003c\/span\u003e pair it with the Dual Motor Focus Controller or any other controller on the market.\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDO NOT\u003c\/span\u003e connect this RJ45 port to the Ultimate Powerbox RJ45 Stepper Output - The RJ45 port at the back is only for the hand controller or the included temperature sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eZero backlash stepper motor:\u003c\/em\u003e\u003cbr\u003eThe embedded bipolar stepper motor provides a zero-backlash movement. The motor allows you to quickly move from any focus point to another. As there is no reduction gearbox the speed is suitable to move the primary mirror or focuser in or out at very fast rates.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEasy and repeatable V-Curve focus:\u003c\/em\u003e\u003cbr\u003eA V-Curve is the result of moving the focus of a telescope from an outside focus position into the focus and then further into the same direction out of focus again. With FocusCube Zero you can achieve a nearly perfect v-curve leading to a sharply focused image.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSCT bracket:\u003c\/em\u003e\u003cbr\u003eA special shaped black anodised aluminium bracket, which is stiff and hard to bend, can be attached to most of the Celestron SCT telescopes. Pegasus has successfully tested them on the following:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCelestron Classic \u0026amp; EdgeHD 6, 8, 9.25\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron Classic \u0026amp; Edge HD 11\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron Classic \u0026amp; Edge HD 14\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron RASA 8\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron RASA 11\" (V2 - for V1 you will need a separate Celestron Retrofit Kit)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron RASA 14\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFor Celestron SCT Telescopes:\u003c\/span\u003e Please note that Pegasus provides three different focuser adapters for the SCT range. The difference is in the metal pulley bore diameter \u0026amp; the screw length in the package. Before purchasing please ensure you have selected the correct type.\u003c\/p\u003e\n\u003cp\u003ePlease note that some older SCT series are not compatible with the SCT bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTemperature Probe:\u003c\/em\u003e\u003cbr\u003eAn external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser \/ environment can be seen through the supplied software or ASCOM driver.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eExpansion Port \/ Manual Focus (optional accessory):\u003c\/em\u003e\u003cbr\u003eFocusCube includes an expansion RJ45 port at the back of the box. This port provides the input for the temperature sensor. An optional hand controller for manual focus control can be acquired separately for those who might want to add this functionality.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eASCOM supported:\u003c\/em\u003e\u003cbr\u003eThe controller is fully compatible with latest ASCOM 6 version.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eINDI (Open Astronomy Instrumentation) supported:\u003c\/em\u003e\u003cbr\u003ePegasus Focuscube is fully compatible with INDI.\u003c\/p\u003e\n\u003cp\u003eOfficial INDI Driver available \u003ca rel=\"noopener\" href=\"https:\/\/indilib.org\/devices\/focusers\/pegasus-dmfc.html\" target=\"_blank\"\u003eHere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFirmware upgrade support:\u003c\/em\u003e\u003cbr\u003eController firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. Pegasus Astro constantly receive feedback from customers and keep updating the firmware and software with new features.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnity Platform Support:\u003c\/em\u003e\u003cbr\u003ePegasus Astro Unity Platform is the new all around application. The goal is to provide a robust and modern application that is going to support current and future Pegasus products under one roof.\u003c\/p\u003e\n\u003cp\u003eA modern frontend allows the full control of all Pegasus Astro devices.\u003cbr\u003eIn addition, a REST JSON api helps developers from 3rd party software developers to interact with Pegasus products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor type: Bipolar stepper motor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBacklash: Zero backlash\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStep angle: 1.8°\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHold torque: 0.8 kp*cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDetent torque: 0.18 kp*cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBelt drive: 16 and 60 teeth, ratio 1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 - 13.8V DC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower connector: Coaxial power connector 5.5\/2.1mm, tip positive\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB connectivity: USB 2.0 Type B plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHand controller connector: RJ45\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermal sensor resolution: 9-bit degrees Celsius temperature measurements\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 °C to +80 °C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 52mm x 58mm x 35mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTotal weight: 280g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003eFocusCube Zero\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSCT Bracket\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eTemperature sensor (0.6m)\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eUSB type B cable (1.8m)\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eTwo aluminium pulleys (16 \u0026amp; 60 teeth) and one transmission belt\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFour M3 x 6mm length screws (to attach the enclosure on the bracket)\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eThree metric screws and washers (to mount the bracket on the SCT)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"SCT \u0026 EdgeHD 6\"\/8\"\/ 9.25\" (RASA 8\")","offer_id":54757575622991,"sku":"PEG-FCZERO-SCT68925","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"SCT \u0026 EdgeHD 11\" (RASA 11\" V2)","offer_id":54757575688527,"sku":"PEG-FCZERO-SCT11","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"SCT \u0026 EdgeHD 14\" (RASA 14\")","offer_id":54757575655759,"sku":"PEG-FCZERO-SCT14","price":350.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PegasusAstroMotorFocusforCelestron_2.jpg?v=1743099653"},{"product_id":"pegasus-astro-advanced-pocket-powerbox-control-hub-gen-3","title":"Pegasus Astro Ultimate Powerbox - Gen 3","description":"\u003cp\u003e\u003cstrong\u003eThe Ultimate Powerbox V3 (UPBv3) is the pinnacle of power and convenience in one sleek package! If you’re weary of the complexities of multiple power packs and tangled cables, the Ultimate Powerbox v3 is the solution you’ve been seeking.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe concept revolves around a compact enclosure that delivers ample amperage power and USB data while maintaining impeccable cable organization. Power up your mount, cameras, filter wheel, and all your essential astronomy equipment, thanks to its versatile multiport design. With the Ultimate Powerbox V3, you can fully control your astronomy gear from one source.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFeatures:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUp to 12V \/ 20Amps of provided electric current (240W).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6 x 12V smart and individual switcable outputs. Each output can be configured as constant 12V or pulse width modulated driven).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi (2.4GHz) or USB Operation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x 12V \/ Always ON Outputs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 x Dew Heaters Outputs. (Automatic Adjustable with AutoDew feature)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Adjustable Power Output 3-12V -Regulated Output of 3Amps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Adjustable Power Output 12-24V – Regulated Output of 4 Amps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Power Relay switch 250V\/10A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6 x USB3.1 (backwards compatible with USB2) and 2 x USB2 available ports (8 USB ports in total). Individually controlled via software.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStepper Motor Controller (Silent and low vibrating stepper controller. Can drive nearly any stepper motor in the astro -market up to 2Amps per coil).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal Wi-Fi Antenna\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in ambient temperature and humidity sensor. Can also accept external sensor and auto-prefer external sensor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower readings (Input Voltage, Current, Current per port).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVESA compatible size enclosure.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eA USB 3.1 Hub controller guarantees seamless functionality for this USB hub across a wide temperature range, spanning from -40°C to +80°C.\u003c\/p\u003e\n\u003cp\u003eOne notable attribute of this hub is its capacity to enable individual ON\/OFF control for each USB port via the software. This feature proves particularly useful in situations where a device becomes unresponsive and necessitates reconnection during inclement conditions, such as during a cold night.\u003c\/p\u003e\n\u003cp\u003eTo address such scenarios, you can conveniently identify the problematic port and initiate a recycling process through the ON\/OFF switch within the software interface. This streamlined solution ensures optimal user experience and ease of operation - Perfect for remote observatories too.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnrivaled Power:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eEach USB port on the UPBv3 delivers up to 2.5 Amperes of power, ensuring your devices are charged and ready to go in no time.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTotal Protection:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eRest easy knowing that your valuable devices are safeguarded. The UPBv3 features electronic short circuit protection, additional Electrostatic Discharge (ESD) protection, and overload electronic protections for all USB ports. Your devices are in safe hands.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBuilt-in Power Sensors:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe UPBv3 is equipped with a highly accurate voltmeter and ammeter capable of measuring currents up to 20A. These instruments provide real-time monitoring of your power input, ensuring you have full visibility into your device’s power consumption.\u003c\/p\u003e\n\u003cp\u003eAutomatic Overvoltage Protection: To safeguard your valuable equipment, the UPBv3 is designed with an automatic overvoltage protection mechanism. If the input voltage exceeds 14.5V, the system responds swiftly by instantly cutting off power, providing a robust shield against potential damage.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Power Outputs and Sensors:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eAlways-ON 12V Outputs: The UPBv3 features 2 dedicated Always-ON 12V outputs, augmenting the total 12V outputs to an impressive 10. When combined with the 2 adjustable outputs, configured to 12V, you can harness a grand total of 10 outlets, providing unparalleled power distribution.\u003c\/p\u003e\n\u003cp\u003eAdjustable Voltage Step Down Output: Offering precise control, the UPBv3 boasts 1 adjustable voltage step-down output, adaptable within the range of 3V to 12V and delivering up to 3 Amps of power.\u003c\/p\u003e\n\u003cp\u003eAdjustable Voltage Step Up Output: Equipped with 1 adjustable voltage step-up output, this feature allows seamless regulation from 12V to 24V, with a formidable power output of up to 4 Amps.\u003c\/p\u003e\n\u003cp\u003eSwitch Relay: The UPBv3 is equipped with a robust switch relay, providing the capability to effortlessly control and manage third-party equipment with ease.\u003c\/p\u003e\n\u003cp\u003eEnvironmental Sensor: Integrated within the device is an ambient temperature and relative humidity sensor. This sensor continuously monitors environmental conditions, providing real-time insights and automatically adjusting the heat intensity of your Dew strips for optimal performance.\u003c\/p\u003e\n\u003cp\u003eNote: We understand that many manufacturers have their unique pinout configuration for certain mounts, such as Skywatcher, Celestron and Vixen to name a few. There are also special power cables available specifically for many of these mounts so you can power it directly from the controller - Please contact us if you require one of these.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eASCOM Alpaca Native Support:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eASCOM Alpaca outshines classic ASCOM drivers with its platform independence, modern web standards, streamlined installation, remote control capabilities, extensibility, and open-source options. This ensures superior compatibility and user-friendly performance, making it the preferred choice for advanced astronomy applications.\u003c\/p\u003e\n\u003cp\u003eThe Ultimate Powerbox v3 comes equipped with an integrated web server that seamlessly communicates with Alpaca clients natively. This integration enhances the user experience by providing easy access to telescope focus control through ASCOM Alpaca but also monitoring from any device with a web browser such as a smart phone.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eInstant Access from any (mobile) device (web browser):\u003cbr\u003e\u003cbr\u003e\u003c\/em\u003eUpon connecting to the Ultimate Powerbox v3 hotspot, the device control is automatically spawned for immediate use. Furthermore, you can conveniently access it from any web browser by simply typing “upbv3.local” in the address bar.\u003c\/p\u003e\n\u003cp\u003eThis feature is operating system-independent and functions seamlessly alongside USB control and the EZY hand controller plug-in, providing flexibility and convenience for users across various setups.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: 12V-14V DC (Reverse Polarity Protected)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Input Connector: XT60 Female\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB3 – Type B USB Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6 x 12V Outputs: Maximum Current 6.0A each. 2.1mm Center Positive - Sense\/ Ammeter in each port.\u003cbr\u003e3 Channel x 12V PWM Outputs: Maximum Current 3A each, RCA Connector, Pulse Width Modulated [3KHz] (Suitable for Dew Heaters \/ Fans \/ Flatpanel), software controlled Duty Cycle % \/ OFF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x Variable Outputs: Adjustable via software. 3-12V \/ 3Amps \u0026amp; adjustable via software. 12-24V \/ 4Amps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 x Always ON 12V Output: 12V passthrough \/ Always ON \/ 8 Amps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStock Sensor Input \/ EXT: 0-100% humidity readings with 2-5% accuracy, -40 to 80°C temperature readings ±0.5°C accuracy.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmmeter: Measures 0 – 20A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltmeter: Measures 5 – 15V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSuperspeed (USB3.1) 8 port powered Hub: Industrial Grade: Temperature range -40°C to +80°C, 6 x\u003c\/li\u003e\n\u003cli\u003eSuperSpeed (USB3.2) ports (backwards compatible with USB2), 2 x High Speed (USB2) ports, USB Ports can be switched ON\/OFF on demand via software (data + power). Each USB port can deliver up to 2.2Amps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStepper Motor Controller: Unipolar and Bipolar Stepper motors (2.0 Amps per phase) – RJ45 socket\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 127.3mm x 116mm x 30mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 400 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eUltimate Powerbox V3\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e4 Power DC 2.2 to 2.1 male cables\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e1 USB Cable Type B (1.8m)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eMounting Screws\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSoftware can be downloaded directly from \u003ca href=\"https:\/\/pegasusastro.com\/products\/ultimate-powerbox-v3\/\" target=\"_blank\" title=\"Pegasus Astro Software for Ultimate Powerbox V3\" rel=\"noopener\"\u003ePegasus Astro here\u003c\/a\u003e\u003c\/p\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":54804900315471,"sku":"PEG-UPBV3","price":645.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-Astro-Ultimate-Powerbox_5_095e8729-2d79-4fd2-b3f8-77e2893eb734.jpg?v=1792935444"},{"product_id":"pegasus-astro-power-12v-10a-uk-irl-plug","title":"Pegasus Astro Power - 12V\/10A (UK\/IRL Plug)","description":"\u003cp\u003eThe Pegasus Astro Power Supply Unit is a sealed and certified unit and is an ideal match for Pegasus Astro Products as well as other brands too. It can provide 12V and up to 10Amps. (120W of total power). Low ripple and noise ensures that you will provide the required and correct “electric juice” to your precious equipment. This power supply comes together with a power cord (1.5m) and a UK\/IRL 3 pin plug configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePlease Note\u003c\/span\u003e\u003c\/strong\u003e: there are three (3) types of DC cords available for this PSU \u003cstrong\u003e(Please ensure you select the correct option)\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.1mm\u003c\/strong\u003e (to power the Pocket Powerbox and any other Pegasus products, length 1.5 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5mm\u003c\/strong\u003e (to power the Ultimate Powerbox Hub \/ Pegasus Astro DewMaster products)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXT60 2.5mm\u003c\/strong\u003e (to power your Ultimate Powerbox V2+ \u0026amp;amp; V3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eProtections:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOver current\/ Short protection: The power supply will self-protect any output to ground \u0026amp; auto recovery when abnormal circuit faults remove. An output short circuit is defined as any output impedance less than 0.1 ohms.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOver Voltage: The power supply will be auto recovered when faults remove\u003cbr\u003eInput protection: F1:6.3A 250V Fuse The power supply shall be protected against power line surges and any abnormal condition\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo Load protection The power supply is provided with no load operation to prevent the power supply and system from damage.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePSU Spec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutput Voltage: 12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad: 0 to 10A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. Power: 120W\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: 90-264 V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector Size: Multiple options - Please choose the correct one from the options listed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 47-63 Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCord Length (consumer side): 180cm (6 feet)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput: Regulated, with low ripple noise\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHousing: Sealed\/protected enclosure (humidity\/dust cannot enter)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 169mm x 61mm x 39mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003ePower supply unit - (UK\/IRL Mains plug)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"2.1 mm - DC Jack Connector","offer_id":57044814594383,"sku":"PEG-PSU-21-UK","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"2.5 mm - DC Jack Connector","offer_id":57044814627151,"sku":"PEG-PSU-25-UK","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XT60 (for Ultimate Powerbox V2 \u0026 V3)","offer_id":57044814659919,"sku":"PEG-PSU-XT60-UK","price":89.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-AstroPower-Supply-21_1.jpg?v=1771244139"},{"product_id":"pegasus-astro-nyx-101-pro-harmonic-mount","title":"Pegasus Astro NYX-101 PRO - Harmonic Mount","description":"\u003cp\u003e\u003cstrong\u003eThe Pegasus Astro NYX-101 PRO - Harmonic Mount strain wave drive on RA and DEC movement ensures a backlash-free operation with high torque at high payloads. This mount has a fully CNC machined aluminum alloy 6061 body that is black and blue anodized, and a selection of branded parts (stepper motors, strain wave gear) inside the mount that ensure the NYX-101 will perform flawlessly for many years.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe Mount includes an electronic brake on the RA axis to prevent backsliding when power is off as well as safety limit stops during slew or tracking too. The Mount can be used as a German Equatorial mount or as an Altazimuth which is more suitable for visual observations.\u003c\/p\u003e\n\u003cp\u003eHigh precision strain wave gears:\u003c\/p\u003e\n\u003cp\u003eHarmonic Gears on both axes ensure high payload and a smooth backlash-free operation.\u003cbr\u003eA hybrid combination of a stepper motor \u0026amp; belt system along with sophisticated electronics can drive the RA axis down to 0.10 arcseconds of resolution.\u003c\/p\u003e\n\u003cp\u003eSupporting high imaging loads:\u003c\/p\u003e\n\u003cp\u003eCounterweights are not required for weights up to 20Kg. (counterweights can be installed for higher photographic loads)\u003c\/p\u003e\n\u003cp\u003eLightweight Design:\u003c\/p\u003e\n\u003cp\u003eCNC-machined aluminum alloy AL6061 used for aircraft makes the mount an excellent choice for your setup. The Mount itself weights just 6.4Kg.\u003cbr\u003eFrom a small refractor to a fully loaded SCT 11-inch telescope, NYX-101 can easily handle the payload of your astronomy gear.\u003c\/p\u003e\n\u003cp\u003eBuilt-in Wireless \u0026amp; USB Control:\u003c\/p\u003e\n\u003cp\u003eNYX-101 supports wireless and USB 2 connectivity out of the box - Both technologies can work simultaneously.\u003cbr\u003eCompatible with ASCOM Alpaca, LX200 protocol and Sky Safari for mobile interaction.\u003c\/p\u003e\n\u003cp\u003ePower Off Brake:\u003c\/p\u003e\n\u003cp\u003eA safety power-off brake is installed on the RA Axis and provides an instant safe stop during a planned or unplanned power interruption.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional key features:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDC 12 Volts Battery Operation. The NYX mount requires only 12V for smooth operation, allowing you to use a standard 12V battery without additional converters. The mount consumes less than 0.6 amps during tracking and up to 2 amps during slewing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUniversal Saddle Plate. The NYX mountincludes a low-profile and rigid universal saddle that accepts Vixen and Losmandy 3-inch dovetails.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated ST-4 Autoguiding Port. An ST-4 port is available, compatible with our dedicated NYX hand controller or an ST-4 guiding camera.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in Electronic Leveler. Mount has an electronic leveler (tilt and pitch) which allows you to easily level the mount on ALTAZ or elevate mount to your site latitude on EQ mode.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRefraction Compensation. NYX-101 includes a barometric \/ pressure sensor allows moun to perform refraction corrections consulting site barometric pressure, altitude.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Output. An extra DC (GX-12) output provides up to 8A to your equipment.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReverse Voltage Polarity Safety. NYX mount has been designed with reverse voltage polarity protection. A saver if you accidentally reverse voltage or battery polarity during the night.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional Counterweight support. The mount does not require counterweights for up to 20Kg of payloads. However, if you need to install counterweights for heavier payloads, there is a compatible M12 threaded shaft hole at the end of the DEC axis.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAuto Home Slew. The automatic home position feature is implemented with encoders on both axes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eASCOM \u0026amp; INDI. The mount fully supports ASCOM 7, ASCOM Alpaca and INDI framework. Sky-Safari is also supported allowing you to control the mount through your mobile device.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLX200 Compatibility. LX200 protocol is fully compatible with the NYX-101 mount. Any device that support LX200 such as Sky-Safari works out of the box with the mount.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMobile Control. A mobile application for IOS and Android platforms allows you to control both axes of the mount, slew to installed catalogs of thousands of night sky targets and do a rough polar alignment through an electronic polar assistant.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSafety limits on RA axis. Safety limit encoders on RA Axis prevent internal cable snag or collision with the tripod.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFirmware Upgrade. An easy firmware upgrade process allows you to stay up to date with bug fixes and the latest features of the mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: CNC machined 6061 aircraft grade aluminum alloy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMount Mode: Equatorial or Altazimuth\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMount Drive: Strain Wave (Harmonic) Gear and Belt resulting reduction 500:1 (RA) and 300:1 (DEC)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad Capacity: 20Kg without counterweights - 30Kg with counterweights\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 6.5Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSafety \/ Power Off Brake: On RA Axis\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDovetail: Vixen and Losmandy 3-inch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRA Motor Resolution: 0.10”\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax Slew: 6 degs\/sec\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Voltage: 12V DC unregulated - approx. 0.6 amps during tracking, 2 amps during slewing\u003c\/li\u003e\n\u003cli\u003eGuide Port: ST4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCounterweight Shaft: M12 Shaft (1.75mm pitch) \/ Recommended 25cm counterweight bar.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCommunication: Wireless 802.11g and USB2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -20° to + 50°C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManufacturers Warranty: 3 years\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in Europe (designed, assembled and tested)in Greece. Pegasus Astro carefully curate the entire manufacturing, testing and packing process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eNYX-101 Harmonic geared mount head (Tripod not included)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePower Supply 12V \/ 5A with GX12 jack\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSoft Case Carry Bag\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eUSB2 Type A to B Cable\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eAzimuth Dowel\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pegasusastro.com\/products\/nyx-101-harmonic-gear-mount\/\" title=\"Pegasus Astro NYX101 Mount Software\" rel=\"noopener\" target=\"_blank\"\u003eClick here to access the downloadable software:\u003c\/a\u003e\u003c\/p\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59244625330511,"sku":"PEG-NYX101-PRO","price":3590.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-Astro-NYX-101-Harmonic-Strain-Wave-Mount_1.webp?v=1792853620"},{"product_id":"pegasus-astro-nyx-88-harmonic-mount","title":"Pegasus Astro NYX-88 - Harmonic Mount","description":"\u003cp\u003e\u003cstrong\u003eThe NYX-88, designed with travelers in mind, offers an impressive payload capacity of up to 14kg (mount weighs 5kg) without the need for counterweights. Engineered for precision and performance in astrophotography and observational astronomy, this mount ensures seamless and reliable operation.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eFeaturing strain wave drives on both the RA and DEC movements, the NYX-88 guarantees a backlash-free experience with high torque even at maximum payloads. Its fully CNC machined aluminum alloy 6061 body, anodized in black and blue, combines durability with aesthetics. Inside, you’ll find top-quality branded components, including stepper motors and strain wave gears, ensuring the mount’s long-term flawless performance.\u003c\/p\u003e\n\u003cp\u003eThe mount also includes an electronic brake on the RA axis to prevent backsliding when the power is off, as well as safety limit stops during slewing or tracking. Whether you’re exploring the night sky from your backyard or a remote location, the NYX-88 is the perfect companion for travelers seeking precision and reliability in their astronomical pursuits.\u003c\/p\u003e\n\u003cp\u003eLightweight \u0026amp; Powerful:\u003c\/p\u003e\n\u003cp\u003eLightweight Design with Impressive payload capacity.\u003cbr\u003eAircraft-Grade Build, CNC-machined aluminum alloy AL6061.\u003cbr\u003eCompact: Mount weighs just 5kg.\u003c\/p\u003e\n\u003cp\u003eHigh precision strain wave gears:\u003c\/p\u003e\n\u003cp\u003eHarmonic Gears on Both Axis ensure high payload capacity and a smooth backlash-free operation.\u003cbr\u003eCombining a stepper motor and belt drive with sophisticated electronics, the RA axis achieves a remarkable 0.15 arcseconds of resolution, offering very low periodic error for ultra-smooth and stable tracking down to sub-arcsecond accuracy.\u003c\/p\u003e\n\u003cp\u003eSupporting high imaging loads for its class:\u003c\/p\u003e\n\u003cp\u003eCounterweights are not required for payloads up to 14Kg.\u003cbr\u003eWith a weight of 5 kg, the mount supports a payload of up to 14kg, demonstrating a high load-to-weight ratio.\u003cbr\u003eHowever, they can be installed for higher payloads by using a counterweight rod.\u003c\/p\u003e\n\u003cp\u003eEquatorial or Altazimuth Mode:\u003c\/p\u003e\n\u003cp\u003eVersatile Mount: Use as German Equatorial or Altazimuth.\u003c\/p\u003e\n\u003cp\u003ePower Off Brake:\u003c\/p\u003e\n\u003cp\u003eRA Axis power-off brake ensures an instant safe stop during any power interruption.\u003c\/p\u003e\n\u003cp\u003eBuilt-in Wireless \u0026amp; USB operation:\u003c\/p\u003e\n\u003cp\u003eSeamless Connectivity: Wireless and USB2 supported simultaneously.\u003cbr\u003eWide Compatibility: Works with ASCOM Alpaca, ASCOM, INDI, and LX200 protocols.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdditional Key Features:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eDC 12 Volts Battery Operation. The NYX-88 mount requires only 12V for smooth operation, allowing you to use a standard 12V battery without additional converters. The mount consumes less than 0.6 amps during tracking and up to 2 amps during slewing.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUniversal Saddle Plate. The NYX-88 mount includes a low-profile and rigid universal saddle that accepts Vixen and Losmandy 3-inch dovetails.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIntegrated ST-4 Autoguiding Port. An ST-4 port is available, compatible with our dedicated NYX hand controller or an ST-4 guiding camera.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSecure DC Output. An extra DC (GX-12) output on the side of the mount provides up to 8A to your equipment.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReverse Voltage Polarity Safety. NYX mount has been designed with reverse voltage polarity protection. A saver if you accidentally reverse voltage or battery polarity during the night.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional Counterweights Support. The mount does not require counterweights for up to 14Kg of payloads. However, if you need to install counterweights for heavier payloads, there is a compatible M12 threaded shaft hole at the end of the DEC axis.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAuto Slew to Home. The automatic home position feature is implemented with encoders on both axes. Mount can automatically initialize to home position on request.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eASCOM, Alpaca \u0026amp; INDI. The mount fully supports ASCOM 7, ASCOM Alpaca and INDI framework. Sky-Safari is also supported allowing you to control the mount through your mobile device.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLX200 Compatibility. LX200 protocol is fully compatible with the NYX-88 mount. Any device that support LX200 such as Sky-Safari works out of the box with the mount.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMobile Control. A mobile application for IOS and Android platforms allows you to control both axes of the mount, slew to installed catalogs of thousands of night sky targets and do a rough polar alignment through an electronic polar assistant.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMount Position Saving. The mount saves its position every second and restores it upon boot.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFirmware Upgradable. An easy firmware upgrade process via USB cable or Air (Wi-Fi) allows you to stay up to date with bug fixes and the latest features of the mount.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMaterial: CNC machined 6061  aircraft aluminum alloy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMount Mode: Equatorial or Altazimuth\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMount Drive: Strain Wave (Harmonic) Gear and Belt resulting reduction 400:1 (RA) and 300:1 (DEC)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad Capacity: 14Kg without counterweights - 20Kg with counterweights\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 5.0Kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSafety \/ Power Off Brake: On RA Axis\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDovetail: Vixen and Losmandy 3-inch\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRA Motor Resolution: 0.15”\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax Slew: 5 degs\/sec\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Voltage: 12V DC unregulated. 0.5amps during tracking, 2.5 amps during slewing\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGuide Port: ST4\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCounterweight Shaft: M12 Shaft (1.75mm pitch)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCommunication: Wireless 802.11g and USB2\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -20° to + 50°C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManuafactures Warranty: 3 years\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMade in Europe (designed, assembled and tested)    in Greece. Pegasus Astro curate the entire manufacturing, testing and packing process.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eNYX-88 Harmonic Geared mount head (Tripod not included)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003ePower Supply 12V \/ 5A with GX12 jack\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eSoft Case carry bag\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eUSB2 Type A to B Cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003ca href=\"https:\/\/pegasusastro.com\/products\/nyx-101-harmonic-gear-mount\/\" title=\"Pegasus Astro NYX101 Mount Software\" rel=\"noopener\" target=\"_blank\"\u003eClick here to access the downloadable software:\u003c\/a\u003e\u003c\/p\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59245100958031,"sku":"PEG-NYX88","price":2299.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-Astro-NYX-88-Harmonic-Strain-Wave-Mount_1.webp?v=1792856181"},{"product_id":"pegasus-astro-flatsmaster-neo-120","title":"Pegasus Astro FlatsMaster NEO - 120","description":"\u003cp\u003e\u003cstrong\u003eFlatMaster Neo 120 is a retractable LED flat-field panel which delivers a uniform illumination source for telescopes up to 120mm, ensuring high-quality flat-field frames for astrophotography and photometric captures. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIts adjustable lid can be precisely positioned between 0° and 270°, doubling as a protective cover against dust and moisture for your telescope lens. Manuafactured from lightweight, aircraft-grade aluminum, the Flatmaster Neo offers a durable and robust design to safeguard your telescope lens for years.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFeatures Overview:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eRobust CNC Aluminium design (no plastic parts).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eControlable and Dimmable LED Panel 0-100%.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRetractable Servo Panel 0-270°.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual Button (controls brightness or closes\/opens panel).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDew heater on panel surface (adjustable 0-100% power).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature \u0026amp; Humidity Sensor.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLight Sensor (detects day or night and closes automatically as required).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi support. (Access Point or Wi-Fi client).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeb Dashboard.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eASCOM7 and ASCOM Alpaca ready.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne cable operation (USB-C).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eDimmable Led Panel:\u003c\/em\u003e\u003cbr\u003eUnlike other panels on the market, the FlatMaster can adjust its brightness from 0 to 100%. Forget sheets of paper between your telescope and the panel. Remote control the brightness of your panel. Store the brightness for each filter and immediately retrieve the value that you need any time. The Flatmaster Neo can go up to very high brightness levels so it can easily support short exposures (2-3 seconds at f\/7) with 3nm narrowband imaging filters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eRetractable Panel:\u003c\/em\u003e\u003cbr\u003eThe panel can be remotely controlled and adjusted between 0° and 270°. To prevent collisions with obstacles, you can set a custom maximum opening angle.\u003cbr\u003eDesigned to fit any telescope up to 120mm the FlatMaster Neo features a specialized silicone flange that ensures a light- and dust-proof seal around your optical elements. Additionally, this flange helps shield the surrounding area from stray light (e.g., in shared host observatory) when the LED is illuminated during flat-frame calibration.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eDew Heater and Sensors:\u003c\/em\u003e\u003cbr\u003eThe device panel features an integrated dew heater that actively removes moisture when fully powered, ensuring a dry, dew-free surface. This prevents water droplets from getting trapped between the lid and the telescope lens after closing. Additionally, a built-in temperature and humidity sensor automatically adjusts the heater based on calculated dew point levels. You can enable or disable this feature as needed or manually set and store the heater’s intensity. A built-in light sensor further enhances automation by automatically closing the lid at sunrise.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWi-Fi Control and Standalone Dashboard:\u003c\/em\u003e\u003cbr\u003eThe device features built-in Wi-Fi, allowing you to connect and control it either via its own Wi-Fi hotspot or as a client on an existing network. Its integrated web dashboard is accessible from any mobile application, providing seamless and intuitive control.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Servo (0-270 degrees) with Led Light Panel (White)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimmable: Yes – (0-100%)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Aircraft Grade Aluminium\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual Push Button: Different brightness levels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsable diameter of illuminated circle: 120mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower requirements: 5V DC provided by USB mini cable (1.5A max current)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: Diameter 250mm x 8mm thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 400g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003eFlatMaster NEO\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59252996309327,"sku":"PEG-FLTMSTR120-NEO","price":579.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-Astro-FlatsMaster-Neo-120.jpg?v=1792927373"},{"product_id":"pegasus-astro-powerbox-advance-gen3","title":"Pegasus Astro Advanced Pocket Powerbox Control Hub - Gen 3","description":"\u003cp\u003e\u003cstrong\u003eThe Pocket Powerbox Advance Gen3 is the all-in-one power and connectivity solution for portable astrophotography setups. Building upon the success of its predecessor, the Gen3 introduces a powerful combination of intelligent power distribution, USB3 connectivity, and integrated device control in an ultra-compact aluminum enclosure.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIt features four individually switchable 12V DC outputs, a dedicated always-on 12V output, and a 3–19V adjustable DC output capable of delivering up to 3A for powering mini computers, mirrorless cameras, or other electronic devices. A built-in 6-port USB hub (4×USB3 + 2×USB2), USB Power Delivery (PD) support, and an integrated stepper motor focuser controller eliminate cable clutter while providing reliable connectivity.\u003c\/p\u003e\n\u003cp\u003eThis powerbox also includes dual PWM dew heater outputs with AutoDew technology, an external temperature and humidity sensor, comprehensive voltage, current and power monitoring, Wi-Fi connectivity with a built-in web dashboard, and full ASCOM 7 and ASCOM Alpaca compatibility. For its protection, it is also esigned with reverse polarity, over-voltage, surge, and ESD protection, the PPBADV Gen3 delivers the performance, flexibility, and reliability required for today’s demanding advanced astrophotography systems.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFeatures:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e4 x 12V DC Power outlets for your equipment - individual channels to switch ON\/OFF each output).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x12V DC always ON output.14 Amps of total distributed current.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOne dedicated adjustable and switchable output (3-19V) \/ 3Amps\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput volt-meter, amp-meter, and power statistics.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e6 port USB hub: 4xUSB3 \u0026amp; 2xUSB2 Ports. (USB3 ports all backwards compatible with USB2).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSurge and ESD protection to all USB ports\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x USB power distrubutrion (PD) port for supported devices\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBuilt-in stepper motor focus controller(1.5A per coil)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEXT Port (RJ12) for ev sensor and external accessories\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal humidity and temperature sensor (included)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAuto tune dew heater channels consulting env sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 Channels PWM dew heaters – RCA outputs. Adjust power levels from software\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eReverse polarity and over-voltage protection\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi controllable (external antenna for optimal reception)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeb dashboard, accessible from any browser, to control the device.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eASCOM 7 and ASCOM Alpaca compatible\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB – PC controlled or standalone operation out of the box\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLightweight and compact aluminium enclosure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eStandalone Operation:\u003c\/em\u003e\u003cbr\u003e“out of the box” - Pocket Powerbox Advance can work “out of the box” as a standalone device. Just plug the cables, setup the “autodew” functionality and every time you boot the device, it will retrieve your settings. So, If you don’t like to connect to a PC every time, you don’t have to. Simple as that!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: Unregulated 12V DC (up to 15V)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Input Connector: DC 2.1mm (Center positive - Can provide up to 14Amp (168W)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB3 Type B Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB Hub: 4 x USB3 (Type-A connector) 2 x USB2 (Type-C connector) - 3A of power per port. Individual Enable\/Disable per USB port. - Surge and ESD protection to all USB ports\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor Controller: Supports Bipolar Stepper Motors, 1.5A per coil\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 x 12 Outputs: Can output 6A per port - 2.1mm (center positive). Individual ON\/OFF switch per port\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 Channel PWM Outputs: Maximum Current 5A, RCA Connector, Pulse Width Modulated (Suitable for Dew Heaters or Flatbox) - Software controllable, Duty Cycle % \/ OFF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Sensor Input: RJ12 Socket, Connectivity with Environmental Sensor. 0-100% humidity readings with 2-5% accuracy and -40 to 80°C temperature readings ±0.5°C accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdjustable Output: 3-19V up to 3 amps. Can turn ON\/OFF and voltage tuned via software. 2.1mm (center positive)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltmeter: Measures input voltage\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 115mm x 75mm x 27.5mm.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 350 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003ePowerbox Advance Controller Gen 3\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e1 x Temperature \u0026amp; Humidity sensor\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e4 x Power cables DC 2.1mm male cables (2 x 1 meter \u0026amp; 2 x 0.5 meter long)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e1 x USB 3 Type B (1.8m)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSoftware can be downloaded directly from \u003ca href=\"https:\/\/pegasusastro.com\/products\/pocket-powerbox-advance-gen3\/\" target=\"_blank\" title=\"Pegasus Astro Pocked Powerbox Software Gen3\" rel=\"noopener\"\u003ePegasus Astro here\u003c\/a\u003e\u003c\/p\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59253155725647,"sku":"PEG-PPBADV3","price":345.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PEG-PPBADVPegasusAstro-AdvancedPowerboxUSBHubGen3_1.webp?v=1792932192"},{"product_id":"pegasus-astro-indigo-filter-wheel-7-x-2","title":"Pegasus Astro Indigo Filter Wheel - 7 x 2\"","description":"\u003cp\u003e\u003cstrong\u003eThe Indigo Filter Wheel offers a range of cutting-edge features to enhance your astrophotography and astronomical observations. This compact and efficient device boasts seamless filter switching, ensuring precise and effortless transitions between filters for minimal image disruption. \u003c\/strong\u003e\u003cstrong\u003eWith its robust build quality and compatibility with 7 position 2inch mounted or 50mm unmounted filters, the Indigo Filter Wheel provides versatility and convenience.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIts integrated stepper motor technology and optical encoders allows for precise filter positioning, and it’s designed to work seamlessly with popular astrophotography software for remote operation.\u003c\/p\u003e\n\u003cp\u003eIndigo Filter Wheel exclusively utilizes a USB2 (Type B) cable, streamlining connectivity by eliminating the need for a separate power supply when employing USB control. This elegant design choice not only simplifies the setup process but also enhances overall convenience for users.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eThin Design:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe body of the Indigo filter wheel is aluminium CNC milled. High quality aluminium alloy allowed us to design the filter wheel as thin as possible (19.0mm, 19.6mm with adapters installed on both sides).\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOrientation on both adapters:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eBoth sides of the filter wheel have M54 openings. The screw slide adapter allows you to properly align the orientation of your camera or telescope side. Just untie the screws and rotate the adapter to the desired orientation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAccurate Filter Selection:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe carousel has seven (7) slots and accepts 2-inch mounted or 50mm unmounted filters. (Max filter diameter should be 50.8mm)\u003c\/p\u003e\n\u003cp\u003eFilter Wheel rotates clock or counterclockwise direction for filter selection. A combination of a direct drive stepper motor and optical encoders ensures that your filter selection is precise, and deadly accurate on every filter location.\u003c\/p\u003e\n\u003cp\u003eThe wheel employs a shortest-path algorithm, ensuring the most efficient and optimal filter changes with minimal movement.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFilter size: Round filters, 2\" mounted or 50 mm unmounted\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNumber of filter slots:  7\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRotation direction: Clockwise or counterclockwise\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDrive and filter lock: Stepper motor and IR sensor for accurate lock position\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection telescope side: M54x0.75\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnection camera side: M54x0.75\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFine alignment: At both connections\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eComputer connection: USB 2.0 Type B\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower: 5V (via USB), max. 300 mA\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Aluminum, CNC milled\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDiameter: 237mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum mechanical thickness: 34.5 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptical thickness: 19.6mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 0.9kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eIndigo Filter wheel\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eM2 screws for unmounted filters\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eUSB 2.0 cable type B, 1.8m\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003eSoftware can be downloaded from \u003ca href=\"https:\/\/pegasusastro.com\/products\/indigo-filter-wheel\/\" target=\"_blank\" title=\"Pegasus Astro Indigo Filter wheel Software\" rel=\"noopener\"\u003ePegasus Astro here\u003c\/a\u003e\u003c\/p\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59255906697551,"sku":null,"price":535.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-Astro-Indigo-Filterwheel_5.webp?v=1792937765"},{"product_id":"pegasus-astro-indigo-off-axis-guider","title":"Pegasus Astro Indigo Off-Axis Guider","description":"\u003cp\u003e\u003cstrong\u003eThis super thin and solid Indigo Off-Axis-Guider can attach directly to your camera or filter wheel. The OAG supports through holes (M2 and M3) in its body for direct connection with the latest CMOS cameras and other Filter Wheels on the market.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe main advantage of having an OAG is that it uses the same optical path as your primary imaging camera. This avoids any issue with differential flexure that can occur when using a separate guide scope on top of your main telescope and can dramatically improve your autoguiding.\u003c\/p\u003e\n\u003cp\u003eA helical focuser addon also provides precise focusing for your guidecamera and and is seamlessly compatibile with 1.25” guiding cameras commonly available on the market.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdjustable prism:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe prism height can be easily adjusted to allow better illumination of the field of view of the guiding camera. If your imaging camera sensor is large, the prism can be moved (and secured with set screws) upwards to disallow blockage of the sensor’s optical path.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eLarge mirror:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eA 12×8 mm fully multicoated \u0026amp; anti-reflection mirror offers high illumination to your guiding camera. Stars are round and bright across the OAG ‘s field.\u003c\/p\u003e\n\u003cp\u003eIndigo OAG supports the 62mm through hole pattern for direct connection with latest CMOS cameras and Filter Wheels. Guiding camera connection is a 1.25” barrel. Orientation of image train framing can be achieved by the 3 screws that allow telescope adapter to slide inside the slots.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSolid design for heavy load of imaging gear:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003eThe thickness is 10mm and is design is solid enough to support heavy imaging equipment. The clear aperture is 53.5mm.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePackage Includes:\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003ea M54F threaded adapter for telescope connection. (adds a thickness of 4mm).\u003cbr\u003ea M48F threaded adapter for camera connection. (adds a thickness of 4mm).\u003c\/p\u003e\n\u003cp\u003eSpec:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Off axis guider\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eClear aperture: 53.5mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTelescope connection: via M48x0.75\/M54x0.75 female thread\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCamera connection: Directly with screws or via M48x0.75\/M54x0.75 female thread (might need adapter to male)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptical path with Indigo Filter Wheel: 14mm (10mm + 4mm of the telescope adapter)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCombined optical path with Indigo filter wheel: 33mm (14mm + 19mm)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptical path with directly connected camera: 14mm (10mm + 4mm of the telescope adapter)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptical path with other cameras: 18mm (10mm + 4mm of the telescope adapter + 4mm of the camera adapter)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePrism size: 12mm x 8mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGuiding camera connection: 1.25\" receptacle\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Aircraft-grade 6061 aluminum alloy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOAG weight without adapter: 215g\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAdapter weight: 35g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eOff-axis guider\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eHelical focuser\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eTelescope adapter with M54 female thread\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eCamera adapter with M48 female thread\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003e6x M3 screws\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59257876185423,"sku":"PEG-INDIGOAGPREM","price":265.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-Astron-Indigo-Off-Axis-Guider_3.webp?v=1792942355"},{"product_id":"pegasus-astro-power-12v-10a-eu-plug","title":"Pegasus Astro Power - 12V\/10A (EU Plug)","description":"\u003cp\u003eThe Pegasus Astro Power Supply Unit is a sealed and certified unit and is an ideal match for Pegasus Astro Products as well as other brands too. It can provide 12V and up to 10Amps. (120W of total power). Low ripple and noise ensures that you will provide the required and correct “electric juice” to your precious equipment. This power supply comes together with a power cord (1.5m) with an EU 2 pin plug configuration.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: rgb(255, 42, 0);\"\u003e\u003cstrong\u003e*\u003c\/strong\u003e\u003c\/span\u003e \u003cstrong\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePlease Note\u003c\/span\u003e:\u003c\/strong\u003e there are three (3) types of DC cords available for this PSU \u003cstrong\u003e(Please ensure you select the correct option)\u003c\/strong\u003e:\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.1mm\u003c\/strong\u003e (to power the Pocket Powerbox and any other Pegasus products, length 1.5 m)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2.5mm\u003c\/strong\u003e (to power the Ultimate Powerbox Hub \/ Pegasus Astro DewMaster products)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eXT60 2.5mm\u003c\/strong\u003e (to power your Ultimate Powerbox V2 and V3)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eProtections:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOver current\/ Short protection: The power supply will self-protect any output to ground \u0026amp; auto recovery when abnormal circuit faults remove. An output short circuit is defined as any output impedance less than 0.1 ohms.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOver Voltage: The power supply will be auto recovered when faults remove\u003cbr\u003eInput protection: F1:6.3A 250V Fuse The power supply shall be protected against power line surges and any abnormal condition\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo Load protection The power supply is provided with no load operation to prevent the power supply and system from damage.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003ePSU Spec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eOutput Voltage: 12V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLoad: 0 to 10A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMax. Power: 120W\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput Voltage Range: 90-264 V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnector Size: Multiple options - Please choose the correct one from the options listed.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eFrequency: 47-63 Hz\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCord Length (consumer side): 180cm (6 feet)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOutput: Regulated, with low ripple noise\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHousing: Sealed\/protected enclosure (humidity\/dust cannot enter)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 169mm x 61mm x 39mm\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003ePower supply unit - (EU Mains plug)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"2.1 mm - DC Jack Connector","offer_id":59262343938383,"sku":"PEG-PSU-21-EU","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"2.5 mm - DC Jack Connector","offer_id":59262343971151,"sku":"PEG-PSU-25-EU","price":89.95,"currency_code":"EUR","in_stock":true},{"title":"XT60 (for Ultimate Powerbox V2 \u0026 V3)","offer_id":59262344003919,"sku":"PEG-PSU-XT60-EU","price":89.95,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-AstroPower-Supply-21_1.jpg?v=1771244139"},{"product_id":"power-cable-for-gx12-socket-mounts","title":"Power cable for GX12 socket mounts","description":"\u003cp\u003eThis adapter cable will allow you to connect your mount to your Powerbox for a stable power supply.\u003c\/p\u003e\n\u003cp\u003eCompatible with all Powerbox Series - Length 1.8m \/6 feet\u003cbr\u003e\u003cem\u003ePlease note that this cable type is compatible with the following mounts:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePegasus Astro NYX-101\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePegasus Astro NYX-88\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSkywatcher AZ-EQ5\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ6-R\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ6-R Pro\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSkywatcher AZ-EQ6 Pro\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ8-R\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSkywatcher EQ8–RH\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003ePower supply cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59262449647951,"sku":"PEG-CABL-GX12","price":32.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/AdaptercableGx12_796a1430-af1e-46c9-9874-13f5b9665b20.jpg?v=1792952047"},{"product_id":"power-cable-for-skywatcher-eq8-mounts","title":"Power cable for Skywatcher EQ8 mounts (1st Gen)","description":"\u003cp\u003eThis adapter cable will allow you to connect your mount to your Powerbox for a stable power supply.\u003c\/p\u003e\n\u003cp\u003eCompatible with all Powerbox Series - Length 1.8m \/6 feet\u003cbr\u003e\u003cem\u003ePlease note that this cable type is compatible with the following mounts:\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSkywatcher EQ8 (Note: EQ8-R \u0026amp; RH requires the smaller \u003ca href=\"https:\/\/www.horizonastronomy.ie\/products\/power-cable-for-gx12-socket-mounts\" target=\"_blank\" rel=\"noopener\"\u003eGX12 plug\u003c\/a\u003e. Please check your mount first before ordering)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003ePower supply cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59262666572111,"sku":"PEG-CABL-GX16","price":32.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/AdaptercableEQ8.jpg?v=1792952230"},{"product_id":"power-cable-for-intel-nuc-mini-pcs-other-similar-equipment-2-1mm-to-2-5mm","title":"Power cable for Intel NUC \u0026 other similar equipment - 2.1mm to 2.5mm","description":"\u003cp\u003eThis adapter cable will allow you to power your equipment using the Pegasus Astro Powerbox for a stable power supply.\u003c\/p\u003e\n\u003cp\u003eCompatible with Intel NUC such as mini PC's and other similarly powered equipment.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMale 2.1mm x 5.5mm to male 2.5mm x 5.5mm\u003c\/li\u003e\n\u003cli\u003eMax Current: 5A\u003c\/li\u003e\n\u003cli\u003eLength 0.5m \/1.6 feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003ePower supply cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59262693212495,"sku":"PEG-CABL2125NUC","price":19.99,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/AdaptercableIntelUNC.jpg?v=1792952694"},{"product_id":"power-cable-for-intel-nuc-other-similar-equipment-2-1mm-to-2-5mm-copy","title":"Power cable for Intel NUC (1.5 meters) - 2.1mm to 2.5mm","description":"\u003cp\u003eThis adapter cable will allow you to power your equipment using the Pegasus Astro Powerbox for a stable power supply.\u003c\/p\u003e\n\u003cp\u003eCompatible with Intel NUC such as mini PC's and other similarly powered equipment.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMale 2.1mm x 5.5mm to male 2.5mm x 5.5mm\u003c\/li\u003e\n\u003cli\u003eMax Current: 5A\u003c\/li\u003e\n\u003cli\u003eLength 1.5m \/5 feet\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003ePower supply cable\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":59262749114703,"sku":"PEG-CABL-2125","price":32.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/AdaptercableIntelUNC-long.jpg?v=1792953261"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/collections\/Soul_Nebula_9bdf8d6a-65b3-488a-98c4-cbaf31e8515c.jpg?v=1779097254","url":"https:\/\/www.horizonastronomy.ie\/en-mt\/collections\/pegasus-astro-astrophotography-equipment.oembed","provider":"Horizon Astronomy • Telescope Center","version":"1.0","type":"link"}