{"title":"Pegasus Astro","description":"\u003cp\u003eHorizon Astronomy is an Authorised PEGASUS ASTRO Retailer for Europe. If you are looking for a specific Pegasus Astro product not listed below please \u003ca href=\"https:\/\/www.horizonastronomy.ie\/pages\/contact-us\" target=\"_blank\" rel=\"noopener\"\u003econtact us here\u003c\/a\u003e\u003ca href=\"https:\/\/www.horizonastronomy.ie\/en-de\/pages\/contact-us\" rel=\"noopener\" target=\"_blank\"\u003e\u003c\/a\u003e - and we would be happy to help you.\u003c\/p\u003e","products":[{"product_id":"pegasus-astro-usb-control-hub","title":"Pegasus Astro USB Control Hub","description":"\u003cp\u003e\u003cstrong\u003eThe Pegasus Astro USB Control Hub (in short UCH).\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eA SuperSpeed (SS), low power, switchable USB3.1 Gen1 hub and fully compliant with USB-IF´s USB 3.1 Gen1 specification. The hub supports Hi-Speed (HS), Full Speed (FS) and Low Speed (LS). The new SuperSpeed hubs operates in parallel with the USB 2.0 controllers, so that 5 Gbps SuperSpeed data transfers are not affected by slower USB 2.0 traffic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e6 x USB3.1 Active Ports:\u003c\/strong\u003e\u003cbr\u003eThis device has 6 x USB 3.1 Ports. All ports are backwards compatible with USB 1.0 and USB 2.0 devices. In addition to this, each port can deliver up to 2.5 A of current. There is a smart current limit sensor in every port which automatically limits or cuts power in case of a short-wire or power consumption that is above 2.5 A. Each port is monitored by the USB controller and in case of a current limit, it triggers a warning popup in the operating system.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAluminum Enclosure:\u003c\/strong\u003e\u003cbr\u003eA high quality robust, blue anodised aluminum enclosure houses the electronics of the USB hub. The metal enclosure designed and tested to survive ±5 kV ESD strikes\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSwitchable USB Ports:\u003c\/strong\u003e\u003cbr\u003eEach USB port can be controlled and switched ON\/OFF by Pegasus Astro´s standalone software (power + data). You are going to love this feature. No more pull out and re-plug USB cables of your equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e12 V DC Operation:\u003c\/strong\u003e\u003cbr\u003eThe 12 V DC operation was Pegasus Astro´s first design requirement. As most of your astro-equipment work with 12 V DC why to use something different?\u003c\/p\u003e\n\u003cp\u003eThe Hub accepts 12-14 V for operation. This means that you can plug unregulated 12V power from a battery.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIndustrial grade temperature support:\u003c\/strong\u003e\u003cbr\u003eMost USB hubs in the market (well, nearly all of them) operate under room temperatures as they were design to work inside your cosy warm room. This is one of the reasons why you experience USB disconnects and instability during a cold night.\u003c\/p\u003e\n\u003cp\u003eThis product is certified to work flawlessly from -40 °C to +85 °C. All USB hub electronics has been selected to support industrial grade temperature ranges.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eASCOM Switch support:\u003c\/strong\u003e\u003cbr\u003eDevice fully supports ASCOM switch. This means that you can switch ON\/OFF each USB port via ASCOM supported software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpansion Port (EXT):\u003c\/strong\u003e\u003cbr\u003eAn RJ12 external ports allows future device expansion.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandalone Software:\u003c\/strong\u003e\u003cbr\u003eSwitch ON\/OFF USB Ports on demand. Monitor USB voltage levels. Easily name each USB port based on the device that is attached on it.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompatibility:\u003c\/strong\u003e\u003cbr\u003eDevice is fully compatible with Microsoft Windows 10, 8, 7, XP, Apple OS X 10.4+, and Linux hub drivers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eUSB Ports: Six downstream USB 3.1 Gen1 \/ 2.0 ports\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB Switchable Ports: All of them [1-6], power \u0026amp; data\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDC Input: 12-14 VDC, 5.5\/2.1mm coaxial power connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmperage on individual port: 2.5 A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum Total Amperage:    8A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: Industrial grade temperature support (-40 °C to +85 °C)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSize: 100 mm x 72 mm x 24 mm \/ 3.9\" x 2.8\" x 0.94\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 200 g \/ 7 oz\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eUSB Control Hub Unit\u003c\/li\u003e\n\u003cli\u003eUSB 3 cable, 1.5 meter long, male A to male B\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":49210302628175,"sku":"PEG-UCH","price":229.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PEG-UCH-PegasusAstroUSBHub.jpg?v=1719584163"},{"product_id":"pegasus-astro-advanced-usb-control-hub","title":"Pegasus Astro Advanced Pocket Powerbox Control Hub - Gen 2","description":"\u003cp\u003e\u003cstrong\u003ePegasusAstro Pocket Powerbox Advance (PPBADV) - Universal Power Supply\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThis Pocket Powerbox Advance (PPBADV) is a welcome addition to Pegasus Astro´s \"Powerbox\" product series. It has been designed to provide more advanced features in a more compact \/ quality design.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e4 x 12 V DC power outlets for your equipment:\u003c\/strong\u003e\u003cbr\u003eA powerful MOSFET transistor provides \"electric juice\" to your precious equipment. It supplies 4 electrical outputs which can be switched on\/off via software (not individually).\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdjustable regulated output:\u003c\/strong\u003e\u003cbr\u003eAn adjustable output is suitable to provide power to your DSLR or mirrorless system camera. You can tune the voltage to different levels (3, 5, 8, 9, 12 V). Pegasus Astro provides different battery couplers for Canon, Nikon, Sony, FUJI cameras.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt in voltmeter:\u003c\/strong\u003e\u003cbr\u003eA precise voltmeter measures and displays in real time your input voltage. If the input is more than 14 V, the power is instantly cut off to protect your equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eBuilt in Amp-meter:\u003c\/strong\u003e\u003cbr\u003eAn Amp-meter placed on the input reports the total current consumed.\u003c\/p\u003e\n\u003cp\u003eIn addition to this, there are three additional amp-meters. One for the 12 V outputs and two for the dew heater channels. Now you can monitor the detailed power consumption of your equipment\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMore than 12 A of total power:\u003c\/strong\u003e\u003cbr\u003eController has been designed to support up to 12 Amps of total current.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandalone operation:\u003c\/strong\u003e\u003cbr\u003ePocket Powerbox Advance can work \"out of the box\" as a standalone device. Just plug the cables, setup the \"autodew\" functionality and every time you boot the device, it will retrieve your settings. So, if you don´t want to connect a PC every time, you don´t have to. Simple as that!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eTwo channel duty cycle PWM outputs:\u003c\/strong\u003e\u003cbr\u003eTwo pulse width modulation (PWM) outlets are capable to provide power to your \"thirsty\" dew heaters. No more moisture fuzzing your equipment and destroying your clear nights. These outlets can be remote controlled from your laptop using the supplied software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAuto adjustment of PWM (dew outputs):\u003c\/strong\u003e\u003cbr\u003eController can auto adjust the heater power levels by consulting the environmental sensor dew point reading. Just click \"Auto\" and leave it for the Pocket Powerbox to decide if its time to turn on and precisley tune the level of your dew heaters.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eEmbedded USB3 hub - 2 x USB3 \u0026amp; 2 x USB2 Ports:\u003c\/strong\u003e\u003cbr\u003eA powered USB3 hub at the back of the device provides\u003cbr\u003e 2 x USB3 SuperSpeed Ports\u003cbr\u003e 2 x USB2 High-Speed Ports\u003c\/p\u003e\n\u003cp\u003eThe new Super Speed hubs operate in parallel with the USB 2.0 controller, so 5 Gbps Super Speed data transfers are not affected by slower USB 2.0 traffic.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003e1 x USB high power output:\u003c\/strong\u003e\u003cbr\u003eA special USB port (Port 1) provides 5.2 V \/ 3 Amps. You can connect any device that requires 5 V. For example a Raspberry PI 3\/4 or an Intel Compute Stick M3\/M5 can be powered from this port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExpansion port (EXT):\u003c\/strong\u003e\u003cbr\u003eEXT (expansion) port is available for device expansion. This RJ12 socket allows the connectivity of current and future Pegasus Astro products. Plugged devices can be controlled from the Pocket Powerbox Advance standalone software or a dedicated ASCOM driver.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCompact aluminium enclosure:\u003c\/strong\u003e\u003cbr\u003eA high quality robust, blue anodised aluminium enclosure houses the electronics of the Pocket Powerbox Advance. Size is 100 mm x 71 mm x 24 mm. Weighs 250 grams.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eASCOM 6 fully supported:\u003c\/strong\u003e\u003cbr\u003ePocket powerbox fully supports ASCOM6. In combination with the main program which acts as a server you can use PegasusAstro´s latest ASCOM 6.4 supplied drivers to:\u003cbr\u003ePass environmental settings to supported software (for example Sequence Generator Pro \/ MaximDL) (ASCOM ObservingConditions)\u003cbr\u003eSwitch ON or OFF all 12 V outputs. (ASCOM Switches)\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eINDI fully supported:\u003c\/strong\u003e\u003cbr\u003ePocket powerbox fully supports INDI, so you can bundle it with Stellarmate or any other device that can use INDILib.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eLed indications for power and failure states:\u003c\/strong\u003e\u003cbr\u003eLed's can blink in patterns to warn you regarding important power issues (like over or under voltage). In addition to this the lights can be turned off using the software. The led is very dim but just in case you don't want them switched on, you can switch it off via the software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003ePower cables are included in the package:\u003c\/strong\u003e\u003cbr\u003eFour power cables with DC connectors 2.1 mm to 2.1 mm male (1 m) are included in the package.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eExternal environmental sensor:\u003c\/strong\u003e\u003cbr\u003eExternal one (1) meter temperature \u0026amp; relative humidity sensor is included in the package. Know exactly the environment conditions of your location. Temperature, humidity and dew point measurements are displayed in the software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eConnectivity:\u003c\/strong\u003e\u003cbr\u003eConnect the device to your laptop\/PC and control Pocket Powerbox Advance from the supplied software or ASCOM drivers\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eReverse polarity protection:\u003c\/strong\u003e\u003cbr\u003ePocket Powerbox has been designed with a reverse voltage polarity protection. It will definitely save your night if you accidentally connect the main power supply in reverse polarity!\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eWatchdog:\u003c\/strong\u003e\u003cbr\u003eA hardware watchdog resets the device if for any reason there is no response from the controller for two seconds. A neat feature in the unlikely event of a controller freeze - when you have a remote observatory and you need to be certain that everything works as expected.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eUpgradable firmware:\u003c\/strong\u003e\u003cbr\u003eDevice is firmware upgradable to support future features and bug fixes.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eMounting accessories:\u003c\/strong\u003e\u003cbr\u003eMounting bolts are available \u003ca href=\"https:\/\/www.horizonastronomy.ie\/products\/m3-x-10mm-attachment-bolts-3-pack?_pos=1\u0026amp;_sid=419a6aaa9\u0026amp;_ss=r\" target=\"_blank\" rel=\"noopener\"\u003ehere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eSupply Voltage: 12 V - 13.8 V DC (reverse polarity protected)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower Input Connector: DC 5.5\/2.1mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eConnectivity: USB3 - Type B USB Connector\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 x 12 V Outputs: Maximum current 10 amps in total, 5.5\/2.1mm tip positive,\u003c\/li\u003e\n\u003cli\u003esoftware-controlled ON\/OFF for all ports\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2 Channel x 12 V PWM Outputs: Maximum current 5 A each, black colored RCA\u003c\/li\u003e\n\u003cli\u003econnector, pulse width modulated (suitable for dew heaters or a Flatbox), software\u003c\/li\u003e\n\u003cli\u003econtrol for duty cycle % \/ OFF\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1x Sensor Input: Mini stereo socket, connectivity with environmental sensor, 0-\u003c\/li\u003e\n\u003cli\u003e100% humidity readings with 2-5% accuracy, -40 to 80 °C temperature readings with ±0.5 °C accuracy\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCamera \/ DSLR Output: Max 3 Amps, 3\/5\/8\/9\/12 Volt, connector 5.5\/2.1 mm, tip positive\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEmbedded Powered USB3 Hub: 2 x USB2 Ports \u0026amp; 2 x USB3 Ports Available (USB3 ports are backwards compatible with USB2 devices)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower USB Port 1: 5.2 V, 3 A, thus suitable for Raspberry PI 3\/4\u003cbr\u003eRJ12 port: For external accessories (like external focus controller)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltmeter: Measures 5 - 15 V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 100 mm x 71 mm x 24 mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 250 grams\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eNote:\u003c\/span\u003e If your devices are not recognised by the controller, please ensure you always connect all the devices by USB cable first, before you connect the controller power supply. This was when the controller powers on, it will scan and pick up the connected devices.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003ePocket Powerbox Advance controller\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExternal temperature \/ humidity sensor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e4 x power DC 2.1 to 2.1 male cable (2x 1 m, 2x 0,5 m)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB3 cable type B (1.8 m)\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":49210346176847,"sku":"PEG-PPBADV","price":315.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PEG-PPBADVPegasusAstro-PowerboxUSBHub.jpg?v=1719585806"},{"product_id":"pegasus-astro-flat-panel-flatmaster-150","title":"Pegasus Astro Flat Panel - Flatmaster 150","description":"\u003cp\u003eThe FlatMaster 150 is a Pegasus Astro flatfield electroluminescent panel. It provides a uniform source of illumination for up apetures up to 150mm and produces high quality flat field frames for astrophotography and photometric captures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimmable EL Panel:\u003c\/strong\u003e\u003cbr\u003eUnlike other EL panels in the market, the FlatMaster can very easily adjust its brightness. Forget sheets of paper between your telescope and the panel. Remotely control the brightness of your panel and store the brightness per filter allowing you to easily retrieve the correct value you need between imaging sessions.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePlease note\u003c\/span\u003e: that FlatMaster can boost its brightness via the supplied software, but it will require to be plugged into a USB3 or USB3 SuperSpeed \/ charging port. A USB3 port can provide twice the current of a normal USB2 port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManual Button:\u003c\/strong\u003e\u003cbr\u003eThe device has a small push button which sets five levels of brightness just in case you would like to manually operate the FlatMaster or have no access to a laptop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne cable operation:\u003c\/strong\u003e\u003cbr\u003eOnly one cable (USB) is required to provide power and control of your flatpanel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eCarry bag:\u003c\/strong\u003e\u003cbr\u003eA carry bag is included allowing you to easily bring the FlatMaster 150 to any location.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandalone Software:\u003c\/strong\u003e\u003cbr\u003eThe software allows to set filter names and store \/ retrieve brightness levels of your FlatMaster panel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNative support by most popular imaging software:\u003c\/strong\u003e\u003cbr\u003eFlatMaster is supported by most popular imaging software like SGPro, APT, Voyager or N.I.N.A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Electroluminescent Panel (White)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimmable: Yes, 0-100%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual Push Button: 5 brightness levels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsable diameter of circle: 150mm \/ 5.9 inches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower requirements: 5 V DC provided by USB type B cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Strong black ABS plastic\u003c\/li\u003e\n\u003cli\u003eSize: Diameter 250mm x 8mm thickness\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 350g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFlatmaster 150\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB type B 1.8 m cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCarry Bag\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":49210411188559,"sku":"FLTMSTR150","price":220.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/FLTMSTR150-PegasusAstroFlatsPanel.jpg?v=1719586563"},{"product_id":"pegasus-astro-flat-panel-flatmaster-250","title":"Pegasus Astro Flat Panel - Flatmaster 250","description":"\u003cp\u003eThe FlatMaster 250 is a Pegasus Astro flatfield electroluminescent panel. It provides a uniform source of illumination for up apertures up to 250mm and produces high quality flat field frames for astrophotography and photometric captures.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDimmable EL Panel:\u003c\/strong\u003e\u003cbr\u003eUnlike other EL panels in the market, the FlatMaster can very easily adjust its brightness. Forget sheets of paper between your telescope and the panel. Remotely control the brightness of your panel and store the brightness per filter allowing you to easily retrieve the correct value you need between imaging sessions.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003ePlease note\u003c\/span\u003e: that FlatMaster can boost its brightness via the supplied software, but it will require to be plugged into a USB3 or USB3 SuperSpeed \/ charging port. A USB3 port can provide twice the current of a normal USB2 port.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eManual Button:\u003c\/strong\u003e\u003cbr\u003eThe device has a small push button which sets five levels of brightness just in case you would like to manually operate the FlatMaster or have no access to a laptop.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOne cable operation:\u003c\/strong\u003e\u003cbr\u003eOnly one cable (USB) is required to provide power and control of your flatpanel.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eStandalone Software:\u003c\/strong\u003e\u003cbr\u003eThe software allows to set filter names and store \/ retrieve brightness levels of your FlatMaster panel\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eNative support by most popular imaging software:\u003c\/strong\u003e\u003cbr\u003eFlatMaster is supported by most popular imaging software like SGPro, APT, Voyager or N.I.N.A\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eType: Electroluminescent Panel (White)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimmable: Yes, 0-100%\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eManual Push Button: 5 brightness levels\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUsable diameter of circle: 250mm \/ 10 inches\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower requirements: 5 V DC provided by USB type B cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaterial: Strong black ABS plastic\u003c\/li\u003e\n\u003cli\u003eSize: Diameter 320mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 600g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eFlatmaster 250\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB type B 1.8 m cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c!----\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":49210419577167,"sku":"PEG-FLTMSTR250L-WIFI","price":480.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/FLTMSTR250_-_Pegasus_Astro_Flats_Panel.jpg?v=1719587071"},{"product_id":"pegasus-camera-field-rotator","title":"Pegasus - Camera Field Rotator V2","description":"\u003cp\u003e\u003cstrong\u003eThe Pegasus Astro Falcon Rotator V2 is a light-weighted, low profile camera field rotator. Its very easy to operate via ASCOM drivers or by using standalone software which will make your life much easier by allowing you to automatically adjust your exact camera field of view with precision.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eOperating the Falcon Rotator V2 is a seamless experience, thanks to its compatibility with classic ASCOM, native ASCOM Alpaca drivers and the Unity Platform software. This user-friendly design simplifies the process of automatically and precisely orienting your camera field, making your astrophotography endeavors significantly more convenient and efficient.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eM68 threads on both sides and low profile:\u003c\/em\u003e\u003cbr\u003eBoth sides of the rotator are M68 threaded, so it is possible to use large sensors without vignetting. The thickness of the rotator is just 15.5mm and the weight only 700g, but it can handle a 6kg payload.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eAdapters for both sides:\u003c\/em\u003e\u003cbr\u003eThere are adapters for many common threads available which can be purchased separately.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003ePrecise rotation:\u003c\/em\u003e\u003cbr\u003eA powerful geared \/ low backlash stepper motor ensures that the rotator will lock to the designated degree angle. High quality mechanical components inside the focuser prevent flexure at any point during a full circle rotation.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eHigh rated load:\u003c\/em\u003e\u003cbr\u003eFalcon Rotator V2 has been tested at 6Kg (13lbs) of imaging setup. The mechanical design allows it to custom tighten internal bearing so it can easily handle higher payloads with almost zero flexure.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eOne Cable Operation:\u003c\/em\u003e\u003cbr\u003eThe rotator can be connected with a USB-C cable for both power and data, reducing complexity in your telescope setup. Additionally, it´s Wi-Fi enabled, allowing you to control your field rotation remotely from your mobile phone.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eField De-Rotation support for Alt\/Az mounts:\u003c\/em\u003e\u003cbr\u003eThe rotator has the mechanical precision to achieve field de-rotation. The supplied Unity Platform calculates Rate of Rotation (RoR) based on the site latitude, target altitude and azimuth position. By fine-tuning the micro-step drive control of the motor, derotation can achieve a resolution as precise as 5 arc-seconds.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eASCOM \u0026amp; INDI support:\u003c\/em\u003e\u003cbr\u003eThe rotator is fully ASCOM 6 supported. INDI support will follow by the time of the launch.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eStandalone software:\u003c\/em\u003e\u003cbr\u003eControl the Falcon Rotator with the supplied standalone Windows software.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpecs:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFree aperture: M68\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePayload: 6kg\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTelescope connection: Female thread M68x1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCamera connection: Female thread M68x1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBack focus: 15.5mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eData connection: USB 2.0, USB-C port\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating power: 5V, 0.7A (via USB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHousing material: Aluminum\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 180mm x 140mm x 56mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 0.7kg\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"font-style: italic;\"\u003e\n\u003cem\u003eFalcon rotator V2\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-style: italic;\"\u003e\n\u003cem\u003e2 x Adapters - M68x1M to M54x0.75F\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-style: italic;\"\u003e\u003cem\u003eUSB-C cable (1.5m)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":54591205376335,"sku":"PEG-ROT-FALCON2","price":725.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus_Astro_Rotator_V2_7.jpg?v=1755947169"},{"product_id":"pegasus-focuscube-v3-motor-focus","title":"Pegasus FocusCube V3 Motor Focus","description":"\u003cp\u003e\u003cstrong\u003ePegasus Astro FocusCube v3 Universal - Standalone Motor Focus\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eIntroducing this cutting-edge solution for achieving fast, reliable, and precise focusing of your telescope in the ever-evolving field of astrophotography. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eIn an era where fast optics and advanced camera devices are essential, maintaining accurate focus is naturally of paramount importance.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eFocuser Overview:\u003c\/strong\u003e\u003cbr\u003eThe below features collectively make FocusCube 3 a versatile and user-friendly device for achieving accurate and repeatable focus in astronomy, catering to both automated and manual control preferences.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eFast and Precise Focusing: Swift and accurate focusing for modern telescopes and cameras.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAutomated Focusing with Temperature Compensation: Maintains optimal focus by automatically adjusting for temperature changes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh Torque Motor: Can move up to 6kg even when pointing at zenith.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLow Backlash: Minimized play for precise focus v-curve points.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUniversal Bracket: Fits various focusers (4mm to 8mm couplers included).\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDigital Temperature Sensor: Monitors ambient temperature changes.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB-C Connectivity: Single cable for power and data.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWi-Fi Enabled: Hotspot and wireless 2.4 GHz client support.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeb Browser Access: Control via web browser on any device, making it OS-independent.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eASCOM Alpaca Support: Seamless integration with popular software.\u003cbr\u003eFirmware Upgradability: Future-proof with software updates.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptional External Hand Controller: Ideal for visual observers who prefer manual control.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eKey Features\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eAdjustable and Universal Bracket for Seamless Focuser Compatibility - This versatile Universal bracket features custom-made holes and rails, meticulously designed to ensure seamless integration with most telescope systems.\u003cbr\u003eWhether you have a refractor, reflector, or any other telescope type, the FocusCube 3’s bracket can be effortlessly adjusted to meet your exact needs.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHigh resolution Geared Stepper Motor coupled with a robust gearbox, delivering an exceptional level of torque that can effortlessly lift and support telescope equipment weighing up to 6 kg, even when pointing at the zenith. What sets this motor system apart is its meticulous attention to precision, as the backlash has been minimized to achieve very low values.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSolid motor couplers included in the package - The package features a selection of five solid motor couplers, each featuring a different bore size. This thoughtful provision allows you to precisely match the coupler to your telescope focuser’s shaft, ensuring a secure and snug fit.\u003cbr\u003eWith options ranging from 4mm to 8mm couplers, you have the flexibility to seamlessly integrate the FocusCube 3 with a wide range of telescope setups.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB \u0026amp; Wi-Fi Connectivity - The FocusCube 3 offers streamlined convenience with a single USB-C cable for both power and data, reducing complexity in your telescope setup. Additionally, it’s Wi-Fi enabled, allowing you to control and monitor focus remotely from your mobile phone.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003eSuccessful installation on the following telescopes: \u003cbr\u003eThe installation of the Universal L bracket on a wide range of telescope focusers has proven to be exceptionally straightforward and swift, ensuring a hassle-free experience for users.\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eBaader Diamond Steeltrack\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBaader Steeltrack\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eExplore Scientific Focuser\u003c\/li\u003e\n\u003cli\u003eAskar Telescopes Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMoonLite Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSkywatcher Esprit Series Focuser\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarField Optics Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarlight Feathertouch Series\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStellarvue Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTakahashi FS-60, TSA-120, Epsilon Focusers\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTakahashi FSQ \u0026amp; TOA Focuser\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVixen ED81S\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWilliam Optics GT71\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWilliam Optics RedCat\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003cp\u003e\u003cstrong\u003eOther Features include:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eAccurate and Repeatable Focus V-Curves with FocusCube 3\u003cbr\u003eFocusCube v3 Harmonizes with Leading Imaging Suites - NINA, SGPro, Voyager, APT, MaximDL, and More!\u003c\/p\u003e\n\u003cp\u003eThe V-Curve results achieved with the FocusCube 3 are consistently accurate and reliably repeatable every time the autofocus routine is initiated.\u003c\/p\u003e\n\u003cp\u003eThe FocusCube 3 offers a hassle-free \"focus and forget\" operation, allowing you to set their focus parameters and continue you observations without constant manual adjustments.\u003c\/p\u003e\n\u003cp\u003eASCOM Alpaca Native Support\u003cbr\u003eFocusCube 3 offers Alpaca native support and a convenient web interface for easy smartphone control of your device.\u003c\/p\u003e\n\u003cp\u003eASCOM Alpaca outshines classic ASCOM drivers with its platform independence, modern web standards, streamlined installation, remote control capabilities, extensibility, and open-source options. This ensures superior compatibility and user-friendly performance, making it the preferred choice for advanced astronomy applications.\u003c\/p\u003e\n\u003cp\u003eFocusCube 3 comes equipped with an integrated web server that seamlessly communicates with Alpaca clients natively. This integration enhances the user experience by providing easy access to telescope focus control through ASCOM Alpaca but also monitoring from any device with a web browser such as a smart phone. Upon connecting to the FocusCube hotspot, the focuser control is automatically spawned for immediate use. Furthermore, you can conveniently access it from any web browser by simply typing \"focuscube.local\" in the address bar.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAdditional Features\u003c\/strong\u003e\u003cbr\u003e\u003cbr\u003e\u003cem\u003eTemperature Probe:\u003c\/em\u003e\u003cbr\u003eThe FocusCube 3 features an external digital temperature sensor input on the focuser’s side, and it comes with a digital temperature sensor. This sensor can be placed near the focuser, allowing you to monitor the exact temperature of both the focuser and the surrounding environment in real-time through the included software or ASCOM driver.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eExpansion Port \/ Manual Focus:\u003c\/em\u003e\u003cbr\u003eFocusCube 3 features an expansion RJ12 port situated at the rear of the enclosure, designed to accommodate the EZY-Focus Hand Controller for manual focus control. This optional accessory allows users to enhance their setup with precise manual focusing capabilities.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eASCOM and INDI support:\u003c\/em\u003e\u003cbr\u003eFocusCube v3 boasts full support for the latest ASCOM, ASCOM Alpaca, and INDI frameworks, ensuring compatibility with a wide range of astronomical software and platforms.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor Step Angle: 7.5°\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGear Ratio: 1\/120\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eGearbox Step Angle: 0.0625°\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSteps per Revolution: 5760\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMotor Shaft Diameter: 5mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSupply voltage: 5V DC (from USB)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCurrent: 0.9 A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB Connectivity: USB-C socket (USB 2.0)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHand Controller Connector: RJ45\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermal Sensor Resolution: 9-bit Celsius temperature measurements\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating Temperature: -20 °C to +80 °C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 59mm x 50mm x 44mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 260g (enclosure with electronics)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\n\u003cem\u003eFocusCube Focuser\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eUniversal L Bracket\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eTemperature sensor (0.6m)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eUSB type A\/C cable (1.m)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003eFive different motor couplers (bore diameter from 4mm to 8mm)\u003c\/em\u003e\u003cbr\u003e\u003cem\u003eDifferent sizes (pairs of M3x10, M4x10, M4x40 M5x10, M6x10) of metric screws and spacers\u003c\/em\u003e\u003cbr\u003e\u003cem\u003e\u003c\/em\u003e\n\u003c\/li\u003e\n\u003cli\u003e\n\u003cem\u003e4 x M3x6 screws (to attach the enclosure on the bracket)\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":54747081965903,"sku":"PEG-FC3-UNIV","price":280.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PegasusAstroUniversalMotorFocus_1.jpg?v=1743007166"},{"product_id":"pegasus-focuscube-v3-motor-focus-for-celestron-sct-telescopes","title":"Pegasus FocusCube V3 Motor Focus (For Celestron SCT Telescopes)","description":"\u003cp\u003e\u003cstrong\u003eA must have for successful automated astrophotography sessions, this Auto-Focuser is fast, reliable and designed with high quality materials and modern electronics. FocusCube can provide digital precise focus control from a PC. \u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eThe device includes a stepper motor for very accurate position focusing with all the electronics and stepper motors enclosed in a compact-sized box.\u003c\/p\u003e\n\u003cp\u003eThe stepper motor provides high speed, focus accuracy, and zero backlash. Attach the FocusCube Zero to your Celestron SCT telescope with the correct adapter, plug in the power, the USB cable and download ASCOM drivers or the Pegasus Unity platform and you are ready to go!\u003c\/p\u003e\n\u003cp\u003eIMPORTANT NOTES:\u003cbr\u003eFocusCube is a standalone device and includes full focus control functionality. No physical hand controller is included or required.\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDO NOT\u003c\/span\u003e pair it with the Dual Motor Focus Controller or any other controller on the market.\u003cbr\u003e\u003cspan style=\"text-decoration: underline;\"\u003eDO NOT\u003c\/span\u003e connect this RJ45 port to the Ultimate Powerbox RJ45 Stepper Output - The RJ45 port at the back is only for the hand controller or the included temperature sensor.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eZero backlash stepper motor:\u003c\/em\u003e\u003cbr\u003eThe embedded bipolar stepper motor provides a zero-backlash movement. The motor allows you to quickly move from any focus point to another. As there is no reduction gearbox the speed is suitable to move the primary mirror or focuser in or out at very fast rates.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eEasy and repeatable V-Curve focus:\u003c\/em\u003e\u003cbr\u003eA V-Curve is the result of moving the focus of a telescope from an outside focus position into the focus and then further into the same direction out of focus again. With FocusCube Zero you can achieve a nearly perfect v-curve leading to a sharply focused image.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSCT bracket:\u003c\/em\u003e\u003cbr\u003eA special shaped black anodised aluminium bracket, which is stiff and hard to bend, can be attached to most of the Celestron SCT telescopes. Pegasus has successfully tested them on the following:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eCelestron Classic \u0026amp; EdgeHD 6, 8, 9.25\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron Classic \u0026amp; Edge HD 11\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron Classic \u0026amp; Edge HD 14\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron RASA 8\"\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron RASA 11\" (V2 - for V1 you will need a separate Celestron Retrofit Kit)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eCelestron RASA 14\"\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cspan style=\"text-decoration: underline;\"\u003eFor Celestron SCT Telescopes:\u003c\/span\u003e Please note that Pegasus provides three different focuser adapters for the SCT range. The difference is in the metal pulley bore diameter \u0026amp; the screw length in the package. Before purchasing please ensure you have selected the correct type.\u003c\/p\u003e\n\u003cp\u003ePlease note that some older SCT series are not compatible with the SCT bracket.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eTemperature Probe:\u003c\/em\u003e\u003cbr\u003eAn external digital temperature sensor input is located near the motor connector. A digital probe of one meter (3 feet) length is supplied. The probe can be placed near the focuser so the exact temperature of the focuser \/ environment can be seen through the supplied software or ASCOM driver.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eExpansion Port \/ Manual Focus (optional accessory):\u003c\/em\u003e\u003cbr\u003eFocusCube includes an expansion RJ45 port at the back of the box. This port provides the input for the temperature sensor. An optional hand controller for manual focus control can be acquired separately for those who might want to add this functionality.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eASCOM supported:\u003c\/em\u003e\u003cbr\u003eThe controller is fully compatible with latest ASCOM 6 version.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eINDI (Open Astronomy Instrumentation) supported:\u003c\/em\u003e\u003cbr\u003ePegasus Focuscube is fully compatible with INDI.\u003c\/p\u003e\n\u003cp\u003eOfficial INDI Driver available \u003ca rel=\"noopener\" href=\"https:\/\/indilib.org\/devices\/focusers\/pegasus-dmfc.html\" target=\"_blank\"\u003eHere\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eFirmware upgrade support:\u003c\/em\u003e\u003cbr\u003eController firmware supports re-programming via the USB 2.0 connection using upgrade software, for future upgrades which may become available. Pegasus Astro constantly receive feedback from customers and keep updating the firmware and software with new features.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUnity Platform Support:\u003c\/em\u003e\u003cbr\u003ePegasus Astro Unity Platform is the new all around application. The goal is to provide a robust and modern application that is going to support current and future Pegasus products under one roof.\u003c\/p\u003e\n\u003cp\u003eA modern frontend allows the full control of all Pegasus Astro devices.\u003cbr\u003eIn addition, a REST JSON api helps developers from 3rd party software developers to interact with Pegasus products.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eMotor type: Bipolar stepper motor\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBacklash: Zero backlash\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStep angle: 1.8°\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHold torque: 0.8 kp*cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDetent torque: 0.18 kp*cm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBelt drive: 16 and 60 teeth, ratio 1\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltage: 12 - 13.8V DC\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower connector: Coaxial power connector 5.5\/2.1mm, tip positive\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB connectivity: USB 2.0 Type B plug\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHand controller connector: RJ45\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eThermal sensor resolution: 9-bit degrees Celsius temperature measurements\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOperating temperature: -40 °C to +80 °C\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eDimensions: 52mm x 58mm x 35mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTotal weight: 280g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003e\u003cem\u003eFocusCube Zero\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eSCT Bracket\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eTemperature sensor (0.6m)\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eUSB type B cable (1.8m)\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eTwo aluminium pulleys (16 \u0026amp; 60 teeth) and one transmission belt\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eFour M3 x 6mm length screws (to attach the enclosure on the bracket)\u003cbr\u003e\u003c\/em\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cem\u003eThree metric screws and washers (to mount the bracket on the SCT)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"SCT \u0026 EdgeHD 6\"\/8\"\/ 9.25\" (RASA 8\")","offer_id":54757575622991,"sku":"PEG-FCZERO-SCT68925","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"SCT \u0026 EdgeHD 11\" (RASA 11\" V2)","offer_id":54757575688527,"sku":"PEG-FCZERO-SCT11","price":350.0,"currency_code":"EUR","in_stock":true},{"title":"SCT \u0026 EdgeHD 14\" (RASA 14\")","offer_id":54757575655759,"sku":"PEG-FCZERO-SCT14","price":350.0,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/PegasusAstroMotorFocusforCelestron_2.jpg?v=1743099653"},{"product_id":"pegasus-astro-advanced-pocket-powerbox-control-hub-gen-3","title":"Pegasus Astro Ultimate Powerbox Control Hub - Gen 3","description":"\u003cp\u003e\u003cstrong\u003ePegasus Astro Ultimate Powerbox v3 (UPBv3)\u003c\/strong\u003e\u003cbr\u003e\u003cstrong\u003eThe Ultimate Powerbox V3 (UPBv3 in short) is the flagship of Pegasus Astro´s Powerbox series.\u003c\/strong\u003e\u003c\/p\u003e\n\u003cp\u003eUPBv3 is a Wi-Fi and USB controlled power hub. A USB 3.1 Hub allows you to switch on\/off 8 USB ports, 8 x 12V power outlets, 2 x adjustable outputs (3-12V and 12-24V), 3 dew heaters, a stepper controller that can drive almost any stepper motor in the astronomy market silently and almost vibration-free as well as a power relay and an expansion port for devices that communicates with the UPBv3 Controller!\u003c\/p\u003e\n\u003cp\u003eIf you are tired of carrying multiple power packs and dealing with a mess of power and data cables, the Ultimate Powerbox v3, a sophisticated power control unit, is the \"Ultimate\" solution. Having all your power and data needs centralised, you minimise cables which can disturb the movements of the mount, only the main power cord and one USB data cord are attached to the Ultimate Powerbox which branches off to power all other devices.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e6 x 12V DC Power outlets for your equipment:\u003c\/em\u003e\u003cbr\u003eSix powerful smart MOSFET transistors provide \"electric power\" to your equipment. Sophisticated short circuit and overload per port protections cut the power and report the incident into the software. Every MOSFET is capable of providing up to 6 amps of current.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eBuilt-in Power Sensors:\u003c\/em\u003e\u003cbr\u003eA precise voltmeter and an ammeter (can measure up to 20A) measure and display in real-time the power input. If the input is more than 14.5V the power is instantly cut off to protect your equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eIndividual Current Meter per 12V smart output:\u003c\/em\u003e\u003cbr\u003eEach smart 12 V output has an internal and independent digital current meter. You can view each port´s power consumption in the software.\u003c\/p\u003e\n\u003cp\u003eAdditional Power Outputs and Sensors:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2 x Always ON 12V outputs increase the total 12V outputs to 10.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Adjustable Voltage Step Down output can be regulated from 3V to 12V and provide up to 3 amps of power.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Adjustable Voltage Step Up output can be regulated from 12V to 24V and provide up to 4 amps of power.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e3 x Dew Heater outputs - the three pulse width modulation (PWM) outlets are capable of providing power to your \"thirsty\" dew heaters \/ flatpanels or telescope fans. Eliminate the moisture that is fuzzing your equipment and destroying your clear nights. These outlets can be remotely tuned from your laptop using the supplied software.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e1 x Switch Relay can pass 250V \/ 10A and used to switch ON\/OFF any 3rd party equipment.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eA built-in ambient temperature and relative humidity sensor provides frequently readouts of the environmental conditions and automatically adjusts the heat intensity of your dew heater strips.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eEmbedded Stepper Motor Controller:\u003c\/em\u003e\u003cbr\u003eA silent and low vibrating stepper motor controller will precisely move your drawtube of your focuser. The controller drives a Pegasus Motor Focus Kit or almost any other stepper motor in the market (Unipolar or Bipolar) e.g. Rigel, Robofocus, Moonlight, Starlight motors. Backlash compensation is already implemented in the firmware and can be enabled, tuned and disabled from the software. A fully ASCOM6 compliant focuser driver is already available.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSupported Stepper Motors:\u003cbr\u003e\u003c\/em\u003eMake sure you have the correct cable for your motor. Every manufacturer uses its own pinout. Contact us if you have any question for the type of your motor.\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003ePegasus Motor Focus Kit (v1\/v2): requires RJ45 to RJ45 common straight network cable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRobofocus: requires cable PEG-CMOT-RJ45DB9\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMoonlite: requires cable PEG-CMOT-RJ45DB9\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLakeside: requires cable PEG-CMOT-RJ45DB9\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarlight HSM 20, 30, 35: requires cable PEG-CMOT-HSM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarlight MSM 20, 30, 35: requires cable PEG-CMOT-MSM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarlight DirectSync motors: requires cable PEG-CMOT-HSM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarizona Microtouch: requires cable PEG-CMOT-MSM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOptec DirectSync or Quicksync motors: requires cable PEG-CMOT-HSM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eRigel nStep motor: requires cable PEG-CMOT-MSM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStarlight POSI Drive Motor: requires cable PEG-CMOT-HSM\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eLacerta Motor: requires cable PEG-CMOT-LCRT\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eVESA compatible enclosure:\u003c\/em\u003e\u003cbr\u003eThe UPBv3 enclosure is compatible with VESA mounts. Available screw holes allow an e.g. Intel NUC to be stacked up with the Ultimate Powerbox v3.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eSupported By ASCOM 6:\u003c\/em\u003e\u003cbr\u003eUltimate powerbox fully supports ASCOM6. In combination with Pegasus Astro´s Unity Software which acts as a server, you can use the latest ASCOM 6 supplied drivers to:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eControl the Stepper Motor (ASCOM Focuser)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePass environmental settings to supported software (e.g Sequence Generator Pro \/ MaximDL \/NINA ) (ASCOM ObservingConditions)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSwitch ON or OFF all 12 V outputs or USB Ports (ASCOM Switches - NINA\/ MaximDL)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eINDI Driver:\u003cbr\u003e\u003c\/em\u003eUltimate Powerbox v3 is fully supported by INDI and INDIGO:\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eIndigo driver: \u003ca href=\"https:\/\/www.indigo-astronomy.org\/\" target=\"_blank\" rel=\"noopener\"\u003eClick Here\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eIndilib driver: \u003ca href=\"https:\/\/indilib.org\/devices\/auxiliary\/pegasus-ultimate-power-box.html\"\u003eClick Here\u003c\/a\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStellarMate\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eN.I.N.A.:\u003c\/em\u003e\u003cbr\u003eThe Ultimate Powerbox v3 is fully supported by NINA.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eOther Key Features\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eZoomable and Exportable Graphs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSoftware logs all voltage, current, temperature and relative humidity readings. All these plots are zoomable and easily exportable in PNG image \u0026amp; CSV text format. Keep a full record of your night conditions.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eScheduler to control outputs\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eEnable or disable each power or USB port by setting a timer and creating groups of ports. You can easily define which output (power or USB) should turn ON or remain OFF during startup. The settings are stored in system´s EEPROM memory.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eAuto Adjustment of PWM (Dew Outputs):\u003c\/em\u003e\u003cbr\u003eDevice can auto adjust the Heater Outputs by consulting the environmental sensor and calculate the Dew Point. Just click \"Auto\" and leave to Ultimate Powerbox v2 to decide if it is time to switch on your dew heaters.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e* You can easily select which Dew Heater output is controlled by the \"Auto Dew\" function.\u003c\/em\u003e\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eReverse Polarity Protection:\u003c\/em\u003e\u003cbr\u003eUltimate Powerbox has been designing with reverse voltage polarity protection. It will protect your equipment if you accidentally connect the main power supply in reverse polarity!\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eA hardware watchdog:\u003c\/em\u003e\u003cbr\u003eA hardware watchdog resets the device if for any reason there is no response from the controller for two seconds. A neat feature in the unlikely event of a controller freeze, is when you own a remote observatory and you need to be certain that everything can be quickly recovered.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003eUpgradable Firmware:\u003c\/em\u003e\u003cbr\u003eThe firmware supports re-programming via the USB or Wi-Fi connection using upgrade software (only available for Windows), for future upgrades which may become available. Pegasus Astro constantly receives feedback from their customers and regularly updates the firmware and software with new features.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eSpec:\u003c\/strong\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eInput voltage: 12 to 14V, auto cut-off at 14.5V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eMaximum current consumption: 20A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower input connector: XT60\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eSwitchable 12V outputs: 6x 5.5\/2.1mm, tip positive, 6A each, PWM or constant, Ammeter for each port.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAlways-on 12V outputs: 2x 5.5\/2.1mm, tip positive, 8A each\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e12V dew heater outputs: 3x RCA connector, 6.5A each\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVariable outputs: 1x 3 to 12V, 3A, and 1x 12 to 24V, 4A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003ePower relay switch: 250V, 10A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eUSB power hub, industrial grade: 6x USB3.1, 2x USB2, each up to 2.2A, all protected against short circuit, overload and ESD, all switchable\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eStepper motor output: RJ45 socket for unipolar or bipolar stepper motors, 2A per phase\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eHumidity sensor: 0 to 100% humidity, built-in\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eTemperature sensor: -40 to +80 °C, built-in\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eVoltmeter: 5 to 15V\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eAmmeter: 0 to 20A\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eBody dimensions: 127.25mm x 116mm x 29mm\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eWeight: 400g\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cem\u003eWhats included:\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli style=\"font-style: italic;\"\u003e\n\u003cem\u003eUltimate Powerbox V3 Controller\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-style: italic;\"\u003e\n\u003cem\u003e4x DC 1m 5.5\/2.1 to 5.5\/2.1 male cable\u003c\/em\u003e\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli style=\"font-style: italic;\"\u003e\u003cem\u003eUSB Cable Type B (1.8m)\u003c\/em\u003e\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"Default Title","offer_id":54804900315471,"sku":"PEG-UPBV3","price":640.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-Astro-Ultimate-Powerbox_8.jpg?v=1743700974"},{"product_id":"pegasus-astro-power-adapter","title":"Pegasus Astro Power - 12V\/10A (EU Plug)","description":"\u003cp\u003eThis Pegasus Astro Power Supply Unit 12V \/ 10A, 2.1mm plug comes with an EU plug (1.8m long).\u003c\/p\u003e\n\u003cp\u003eThis sealed and certified switching power supply unit is the perfect match for a wide range of Pegasus astro products. It can provide 12V and up to 10A (120W of total power). Low ripple and noise ensures that you will provide the required and correct \"power\" to your various equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e* Please note there are three (3) types of DC cords (\u003cspan style=\"text-decoration: underline;\"\u003ePlease ensure you select the correct option\u003c\/span\u003e):\u003c\/em\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.1 mm (for Pocket Powerbox and any other Pegasus products, length 1.5 m)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2.5 mm (for Ultimate Powerbox \/ DewMaster)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eXT60 (for Ultimate Powerbox V2+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProtections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eOvercurrent\/ short circuit protection: The power supply will self-protect any output to ground \u0026amp; auto recovery when abnormal circuit faults are removed. An output short circuit is defined as any output impedance less than 0.1 ohms.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOvervoltage: The power supply will be auto recovered when faults are removed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput protection: F1 6.3 A 250 V fuse. The power supply shall be protected against power line surges and any abnormal condition.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo-load protection The power supply is provided with no-load operation to prevent the power supply and system from damage.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"2.1 mm (for Pocket Powerbox and any other Pegasus products)","offer_id":57044575715663,"sku":"PEG-PSU-21-EU-1","price":87.9,"currency_code":"EUR","in_stock":false},{"title":"2.5 mm (for Ultimate Powerbox \/ DewMaster)","offer_id":57044575748431,"sku":"PEG-PSU-25-EU","price":87.9,"currency_code":"EUR","in_stock":false},{"title":"XT60 (for Ultimate Powerbox V2+)","offer_id":57044575781199,"sku":"PEG-PSU-XT60-EU","price":89.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-AstroPower-Supply-21_1.jpg?v=1771244139"},{"product_id":"pegasus-astro-power-12v-10a-uk-irl-plug","title":"Pegasus Astro Power - 12V\/10A (UK\/IRL Plug)","description":"\u003cp\u003eThis Pegasus Astro Power Supply Unit 12V \/ 10A, 2.1mm plug comes with an UK\/IRL plug (1.8m long).\u003c\/p\u003e\n\u003cp\u003eThis sealed and certified switching power supply unit is the perfect match for a wide range of Pegasus astro products. It can provide 12V and up to 10A (120W of total power). Low ripple and noise ensures that you will provide the required and correct \"power\" to your various equipment.\u003c\/p\u003e\n\u003cp\u003e\u003cem\u003e* Please note there are three (3) types of DC cords (\u003cspan style=\"text-decoration: underline;\"\u003ePlease ensure you select the correct option\u003c\/span\u003e):\u003c\/em\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e2.1 mm (for Pocket Powerbox and any other Pegasus products, length 1.5 m)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003e2.5 mm (for Ultimate Powerbox \/ DewMaster)\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eXT60 (for Ultimate Powerbox V2+)\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eProtections:\u003c\/strong\u003e\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eOvercurrent\/ short circuit protection: The power supply will self-protect any output to ground \u0026amp; auto recovery when abnormal circuit faults are removed. An output short circuit is defined as any output impedance less than 0.1 ohms.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eOvervoltage: The power supply will be auto recovered when faults are removed\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eInput protection: F1 6.3 A 250 V fuse. The power supply shall be protected against power line surges and any abnormal condition.\u003cbr\u003e\n\u003c\/li\u003e\n\u003cli\u003eNo-load protection The power supply is provided with no-load operation to prevent the power supply and system from damage.\u003c\/li\u003e\n\u003c\/ol\u003e","brand":"Pegasus Astro","offers":[{"title":"2.1 mm (for Pocket Powerbox and any other Pegasus products)","offer_id":57044814594383,"sku":"PEG-PSU-21-UK","price":87.9,"currency_code":"EUR","in_stock":false},{"title":"2.5 mm (for Ultimate Powerbox \/ DewMaster)","offer_id":57044814627151,"sku":"PEG-PSU-25-UK","price":87.9,"currency_code":"EUR","in_stock":false},{"title":"XT60 (for Ultimate Powerbox V2+)","offer_id":57044814659919,"sku":"PEG-PSU-XT60-UK","price":89.9,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/files\/Pegasus-AstroPower-Supply-21_1.jpg?v=1771244139"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0596\/1924\/6275\/collections\/Soul_Nebula_9bdf8d6a-65b3-488a-98c4-cbaf31e8515c.jpg?v=1779097254","url":"https:\/\/www.horizonastronomy.ie\/en-it\/collections\/pegasus-astro-1.oembed","provider":"Horizon Astronomy • Telescope Center","version":"1.0","type":"link"}